Woodworker: Charles WiedmanWiedman’s client asked for a carved dressing mirror that would portray oneness with the earth and its solar system. The mirror features a carved mahogany frame with cherry legs and feet, Inset is a 1/4-in. beveled mirror. Photo: Charles Wiedman
Fine Woodworking Recommended Products
WoodRiver Bevel Edge Socket Chisel Set
These chisels are well balanced, with a light-weight handle that makes gripping them down by the edge during chopping less fatiguing than many other chisels. Each chisel only requires a few minutes of work before its back is polished and ready to go. Similarly, the bevels all have a consistent grind that is quick to hone to razor sharpness. The smartly shaped beveled edges give the tool good mass, but with a very fine, consistent land (the flat between the side bevel and back) that won’t interfere with working in confined spaces.
Create jigs and shop fixtures with the versatile MICROJIG® MATCHFIT Dovetail Hardware. Now it is possible to rout your own tracks, eliminating the need for an aluminum T-Track. This hardware moves through the dovetail tracks below the surface, allowing you to create a variety of jigs that move freely and tighten down anywhere you can rout a groove. Create your own fences, stops, hold-downs, and assembly fixtures.
Knife changes on this planer were easy enough, except that you need an Allen wrench to open the dust cover and gain access to the knives, and it’s not the same size as the wrench used to loosen the screws that secure the knives. The 2-1/2-in.-dia. dust port can be reversed for use on either side of the machine. Two material rollers on top of the machine aid with transferring stock from the outfeed side back to the infeed side. Finally, there is no gauge that indicates how much material you’re about to remove, a convenience that three other planers also lack.
With a two-fence, double-ended design, you're able to set two distances on the same gauge. However, the small fences make this tool difficult to hold comfortably and securely against the edge of the work while scribing lines, requiring more focus and effort.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in