How to Make a Simple Jig for Offset Knife Hinges
Fixing Woodworking Mistakes
3 Steps to Great Glue-Ups: Sliding Dovetail Joints
Five Minute Guide: Glue-Ups
Upgrade Your Jointer with a Segmented Cutterhead
Buying and Using Trim Routers
How to Drill Windsor Chair Mortises
How to Sharpen a Card Scraper
Best Tabletop Finish
How to Cut Sliding Dovetail Joints
T-Track is a Smart Workbench Accessory
Dedicated Sled Delivers Perfect Finger Joints
Tablesaw Tapering Jig is Safer and Faster
Router Jig for Perfectly Aligned Dadoes
Five Minute Guide: How to Use a Tablesaw
Box Making Tips and Tricks
How to Apply an Aerosol Finish

Jigs

Corner Spine Jig

comments (0) December 27th, 2011 in Jigs

dads66, member

3 users recommend

Add Comment
Print

Corner Spine jig for cutting for spines for strong glue joints on thinner wood. ON the 5/8 wood you need the extra glue surface of a spine to give it strenth. The one that is hard to do is cut all corners to the same depth and same place so that you piece glues up square when assembled. THis jig works great for that and has saved me many hours in the assembly process.

posted in: Jigs, jig, plywood

Add Comment Print