Mortises in Round Legs--Trim and Keep

comments (4) August 10th, 2014 in blogs

DaveRichards David Richards, contributor
thumbs up 11 users recommend

Generally, when I create SketchUp models of furniture, I like to get the bulk of the modeling completed and then go back and add joinery. As I've demonstrated in many of my blog posts, I make the drawing process more efficient, by drawing parts in situ so I can use parts I've already drawn as references for the next parts I need to draw. I use this same idea for the joinery using one half of the joint to guide me in making the other half. As an example, when I need to cut a mortise in square leg to receive the tenon on an apron or stretcher, I trace the base of the tenon on the leg and use Push/Pull to push in the mortise. That's very fast and accurate and requires no layout for the mortise.

When the geometry gets more complicated a simple Push/Pull operation may not be an option. In those situations we need to find other methods to get the work done. The round and slightly bulged legs of Mario Rodriguez's Scandinavian Kitchen Table is a case in point. The shoulders of the stretchers land on flats cut into the legs and then there's a mortise for the tenon. Once the flat is cut the mortise could be made with Push/Pull but it's easy enough to make the flat and mortise in one process.

If you are using the pro version of SketchUp you could use the Trim tool from the Solid Tools set. This would allow you to use the stretcher to cut the flat and mortise. I'm not all that fond of the Solid Tools, though. Currently the tools convert modified components into groups. On this table the legs are instances of the same component. Using the Trim tool would get me a mortise in one leg but the other three would still need to be dealt with. That's not any better than making them out of real wood in the shop! :)

There is an alternative for those of us using the pro version, though. Jim Foltz wrote a plugin some time back called Trim and Keep. It utilizes the Trim tool from the Solid Tools set but it keeps the modified component as a component and as such, all other instances get modified, too. Note: this is a pro-only plugin because it requires the Trim function of the Solid Tools which isn't available in the free version.

For those of you using the free version, you can, of course, still draw the joinery but you'll use Intersect Faces. The process I show in the video utilizes copying the involved geometry from the stretcher and using Edit>Paste in place to paste it into the leg component. Then Intersect Faces followed by a little clean up. You might run into some tutorials on Intersect Faces that would suggest you could just use that tool to intersect the stretcher with the leg. And you could, too, but you wouldn't get the faces or any of the edges that fall inside the leg. You really need to have the faces and edges pasted into the component or you'll still be constructing a lot of the joint by hand.

So here's a video that shows using Trim and Keep as well as doing it the manual way.





posted in: blogs

Comments (4)

DaveRichards DaveRichards writes: TKWW2 wrote: "When you say Tiny Faces, don't you really mean "Small Faces"?"

Perhaps if it were a "Lazy Sunday". ;)
Posted: 4:12 am on August 13th

TKWW2 TKWW2 writes: When you say Tiny Faces, don't you really mean "Small Faces"?
Posted: 3:05 pm on August 11th

DaveRichards DaveRichards writes: John, I expect I can help you with getting the plugin installed. Drop me an e-mail by clicking on my name at the end of the blog post. Tell me what operating system you have while you're at it.

Posted: 1:29 pm on August 11th

John5of6 John5of6 writes: Hi Dave,

Thanks for the blog on mortises in round legs. I tried to install the trim and keep plugin in to Sketchup pro 2014 and was unable to find it in tools menu. I seem to have problems with 2014 plugins. Can you help?

Thank you for all the great articles you write.
John Hansey
Posted: 1:20 pm on August 11th

You must be logged in to post comments. Log in.

Save up to 51% on Fine Woodworking


Become a Better Woodworker

About Design. Click. Build.

Learn the art and science of designing furniture in SketchUp with Fine Woodworking's official blog. Moderated by a devoted community of woodworkers, we feature step-by-step SketchUp tutorials on designing components, downloads of pre-built 3D models of furniture parts, and news and information about the evolving world of digital furniture design.

Buy the Video
Don't miss Dave Richard's brand-new DVD/video download, The Basics.

Buy the Book
Get Tim Killen's popular eBook, the Google SketchUp Guide for Woodworkers.

Basic SketchUp Tutorials 
Learn the basics of building furniture in SketchUp with these classic posts from the Design. Click. Build. blog.

Creating a Project Plan in SketchUp
How I Draw in SketchUp
Axes in SketchUp
The SketchUp Move Tool
The SketchUp Rotate Tool
The SketchUp Scale Tool

Materials, Colors, and Textures
Applying Wood Grain Skins in SketchUp

Easy Dovetail Joints in SketchUp

Digital Project Plans

Download and modify SketchUp files for select projects from Fine Woodworking. View all.

Top Sellers:
Matt's Monster Workbench
New England Pine Cupboard
Garden Bench

Meet the Authors



I am a Biomedical Equipment Technician. I maintain anesthesia and respiratory equipment for the largest medical facility in southeast Minnesota. I...
view profile

Tim Killen

I am retired from Bechtel Corporation after 36 years in Engineering and IT management. I grew up among woodworking machinery in...
view profile


view profile