Street price: $490 Motor: 3/4 hp Hold-down: Excellent Clamping: Good Fence: Very good Table: Very good Depth stop: Very good Comments: Every adjustment, except for drill chuck, can be made without a tool.
Fine Woodworking Recommended Products
Stanley Powerlock 16-ft. tape measure
With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.
The big motor on this collector left the chamber under my jointer very clean. You’ll need help to get this heavy unit onto its bracket, but if you’re looking for a central dust collector that won’t gobble floor space, this may be the unit for you. Strangely, this huge unit comes with the smallest plastic chip bag, but you can replace that with a taller one from Rockler.
Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.
The DeWalt 735X produced two faces perfectly parallel to one another, with surfaces far superior to what the other machines produced, thanks to its two feed speeds. At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy, with spacious access to the cutterhead from the top and a gib screw wrench that doubles as a magnetic lift to remove the knives. The 735X also has great dust collection, thanks to an internal blower that helps evacuate chips. The port has a 2-1/2-in.-dia. opening, but has a built-in adapter for 4-in.-dia. hoses. My only complaint is the location of the dust port. It’s on the outfeed side of the machine, and exits straight back. If you don’t pull the hose to the side, it interferes with material as it leaves the machine. The top is large and flat, so it’s a great place to set material in between passes through the machine.
I have this tool and it works great. Many conveniences for the operator. The only downside is the fence doesn't stay square when moving it in and out; you have to be careful with setup. But one it's in the right place it does a beautiful job.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Comments
I have this tool and it works great. Many conveniences for the operator. The only downside is the fence doesn't stay square when moving it in and out; you have to be careful with setup. But one it's in the right place it does a beautiful job.
Log in or create an account to post a comment.
Sign up Log in