tag: cherry


showing 1 - 20 of 88 posts matching varnish [X]
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Cherry Kitchen Cabinets using Kreg Jig

Cherry Kitchen Cabinets using Kreg Jig

Cherry finished with Boiled Linseed Oil, 2 coats Dark GARNET Shellac and 3 ooats Polyuretane. Photo 3 is a sideboard located in the Dining Room. I used a Kreg Jig and used pocket hole construction.

view details
Six Shaker Dining Chairs

Six Shaker Dining Chairs

These chairs are based on the proportions of a Shaker No. 3 side chair. The finials are patterned after ones characteristic of the Shaker community in Harvard, Mass. The legs and spindles are...

view details
Large Shaker Trestle Table

Large Shaker Trestle Table

104" long, 38" wide, I think this is the biggest thing I've made. With leaves at each end the length becomes 124". The top is an inch thick, but because of the length I started milling with 64...

view details
Cherry Night Table

Cherry Night Table

1 comment

Hi, Here is my first attempt at using hardwood in a furniture project. It is made of cherry, with baltic birch for the drawers. I decided to use soft closing drawer slides because of personal...

view details
Garrett Hacks Elegant Side Table

Garrett Hack's Elegant Side Table

1 comment

I made some minor tweek's to Garrett's plans and wood selection.  The legs are cherry. Aprons and top are maple. Drawer bottom is Douglas fir. Ebony "socks" give the legs a chocolate dipped...

view details
Entrance furniture

Entrance furniture

2 comments

A little cabinet to store shoes in a small entrance way.

view details
Cherry Bed Frame

Cherry Bed Frame

Cherry bed frame styled after one by Thos Moser. Finished with oil varnish mixture. My wife loves it, as do I.

view details
Greene and Greene inspired coffee table

Greene and Greene inspired coffee table

This Greene and Greene styled coffee table is made primarily of cherry with walnut and ebony accents. It is approximately 24" x 50" x 18.5"   The inlay in the middle of the top is composed of ebony...

view details
Receptionist Desk: cherry with walnut highlights.

Receptionist Desk: cherry with walnut highlights.

Desk with bread board top, quirk legs, doweled runners, hand cut dove tails. Mortise  & tenon construction.  Heavy duty runners that are dowed doweled through aprons adding interesting visual...

view details
The W Cabinet

The W Cabinet

I built this cabinet to store my coffee k cups. The carcas is Curly Cherry. The doors were made from a book matched set of Red Elm boards. The interior has an adjustable shelf. 

view details
Monogrammed Windsor Chair

Monogrammed Windsor Chair

Woodworker: Mark BellonbyAfter four years learning the craft of Windsor-chair making, Bellonby took the traditional design and added his own touches when he built this chair for his daughter and...

view details
Cherry and Ash Sideboard

Cherry and Ash Sideboard

Woodworker: Bart NiswongerThough the piece is based loosely on Émile-Jacques Ruhlmann’s designs, Niswonger added a topographical element to this cherry and ash sideboard (17 in. deep by 55 in...

view details
Glass Top Coffee Table

Glass Top Coffee Table

Woodworker: Jerry FrostInspired by the need for a square table, Frost adapted the rectangular design of Christian Becksvoort’s “Glass-Top Coffee Table” (FWW #92) when he built this version 30...

view details
Cherry Dictionary Stand

Cherry Dictionary Stand

Woodworker: James A. Harper, Jr. James A. Harper Jr. was inspired to build this stand as a very late wedding gift, after a friend received a two-volume dictionary as a first anniversary gift from...

view details
Bow-Sided Buffet

Bow-Sided Buffet

Woodworker: Brian Bortz This bow-sided buffet was inspired by the Art Deco era. Bortz used pommele eucalyptus, Macassar ebony, and cherry to create the contrast in color and grain. The finish is...

view details
Cherry Sideboard

Cherry Sideboard

Woodworker: Timothy Clark Clark built this cherry sideboard to match an existing dining room set. To accommodate a small dining room, he squeezed the depth to 18 in. rather than the standard 22 in...

view details
Laminated Grandfather Clock

Laminated Grandfather Clock

Woodworker: Kevin A. Tuffo Tuffo made this 7-ft.-tall clock as a gift for his parents and to test techniques learned in the furniture-making program at Haywood Community College, in North...

view details
Porringer-Top Tea Table

Porringer-Top Tea Table

1 comment

Woodworker: Dan Faia Dan Faia built this Queen Anne porringer-style table (FWW, June 2007) based on a design he saw in an antiques catalog. The original was built in Wethersfield, Conn. between 1740...

view details
Curve-Front Lantern

Curve-Front Lantern

Woodworker: Rob Brown Rob Brown designed this curved-front lantern to highlight the beauty of the handmade Japanese paper. The simple design radiates light 180 degrees. He made the frame from curly...

view details
Reading in Autumn Table with a Drawer

"Reading in Autumn" Table with a Drawer

Woodworker: Jeffrey Cooper This table is made from lacewood and cherry and is finished with an oil/varnish mix. Cooper incorporated a relief carving and a poem by the 13th-century Chinese master Shen...

view details
showing 1 - 20 of 88 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

362899 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

saragoodwin saragoodwin
joined Dec 18
wworker2 wworker2
joined May 11
markmech2002 markmech2002
joined Oct 30

jdecker jdecker
joined Jul 25
greg757 greg757
joined Dec 11
MatijaZajsek MatijaZajsek
joined Dec 8


Create your profile now!