showing 1 - 20 of 51 posts
1 2 3 Next >
this maple burl & cherry cabinet is 15" deepx 24" wide 36" tall
and is finished in shellac to see more of my work visit www.Andersonwoodwork.net
Segmented Bowl in Florida Cherry and Tiger Stripe Maple.
Finished in a combination of Linseed oil and Polyureathane, thinned with Mineral Spirits.
Topped with two coats of Crystl Wax.
This is the coffee table that my wife Rachel designed and I built it is 3' wide x 5' long made with figured maple all mortis & tenon joinery and the finish is hand rubbed oil. To order one give us a...
Cherry wood is responsible for this funky red lighting effect - a chance discovery on my side :) Furthermore, it combines nicely with fir in terms of texture and color. The lampshade, the cover for...
My wife made a cutting board using some scraps I picked up at the local Hicksville Planing Mill near Hagerstown, MD. After she cut the board to length, I used the leftover piece of scrap to create...
Drill bits in various sizes
Round pieces of wood;
Primer and paint.
Sandpaper if the wooden surface needs more extensive preparation than just a coat of...
(973)923-3273 We have more than one million board feet of reclaimed antique barn wood, wide plank flooring, siding, beams, & barn doors in stock. We dismantle, mill, install every product we sell...
My girlfirend wanted a way to organize her makeup brushes as she seems to have a lot of them. I gladly accepted this challenge as I did not see it being difficult project and I would like a more...
After a summer of projects, I had quite a pile of scrap that was bound for the fire pit in the back yard. Rather than burn, I decided to build! All total I built around a dozen cutting boards...
This is a Handmade Dovetail box made from beech with marquerty on lid. It is currently on show in Farmleigh House in Pheonix Park in Dublin Ireland which is a huge achievement. I made it while in...
This kitchen step stool is a gift for my very patient wife who waited for two years while I built a traditional cherry kitchen for our house. (I have a day job.) The ceilings are nine feet, so the...
I built this cherry pool table light expanded from an arts and craft lamp design I saw in AW. The panes are stained glass. The finish is two coats of Danish Oil. The electrics are...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
This cake stand set is crafted from solid cherry with glass tops and forged details. A forged steel vine adorned with copper leaves wraps around each base holding the glass tops in place. nbspThe...
EASTER EGG DISPLAY I MADE FOR A COLLECTION OF ABOUT THIRTY YEAR OLD EGGS
MADE FROM JATOBA AND MAPLE
This is the work of Chris Cantrell of Cantrell Woodworks Inc., Port Townsend, WA. Chris' passion and challenge is to design incorporating a variety of media, such as glass, steel, and wood, with...
I have an old pair on BIC Formula 4 speakers that have been an eyesore since I can remember. They sound great, but are huge,bulky and covered in a hideous imitation walnut vinyl sheetnbsp...
One item I like to make are trays. I find most bought trays are very small especially when trying to take breakfast to your wife. I often make them as presents because you can never have too many...
My son wanted a footstool for his dorm and gave me a photo that inspired this design. Simple half lapped on the faces with mortise and tennons at the stretchers. A very basic leather...
Save up to 51% on Fine Woodworking
Become a Better Woodworker