Subscribe now and save up to 56%
Woodworker/actor Nick Offerman, whose slab-leveling jig was featured in issue #222 will be on the show. Look for additional guest appearances by other FWW contributors as well.
Every two weeks, a team of Fine Woodworking staffers answer questions from readers on Shop Talk Live, Fine Woodworking’s biweekly podcast and video livestream. Send your woodworking questions to email@example.com for consideration in the regular broadcast!
Listen to the Podcast
On this week’s edition of Fine Woodworking’s very own podcast, we answer your woodworking questions as we record from Fine Woodworking Live, the magazine’s first-ever live event.
Special Guests Including Woodworker/Actor Nick OffermanAlthough he is perhaps best known for portraying the deadpan Ron Swanson on the NBC’s hit sitcom, Parks & Recreation, Nick Offerman is a diehard woodworker. We’ll be grabbing him ahead of his appearance at Fine Woodworking Live to answer questions and talk shop. Plus, Nick is joined on the show by one of his favorite FW contributors: Christian Becksvoort
Listen to Previous Episodes
This week, we'll be recording from the floor, at Fine Woodworking Live, the magazine's first-ever live woodworking event. Tune in for special guest appearances.
Get woodworking tips, expert advice and special offers in your inbox
Become a member today
Get instant access to all FineWoodworking.com content.
Subscribe to Fine Woodworking
Save up to 56%
Nice listening. Here is my problem. I need to stop playback periodically and every time I stop it, it starts back up from the beginning. Very annoying. Need to be able to pause these podcasts and start again from the paused point. Also, it would be nice to fast forward through some of that stuff I've already listened to after attempting to pause. Fix these and you'll get the coveted 5 star rating. Thanks.
Regarding the safety of polyethylene glycol (PEG) in filling wood, polyethylene glycol is is not ethylene glycol (antifreeze stuff), and is non-toxic. It is used medically as a laxative, and if you have had a colonoscopy, you have probably drunken it in the "prep". If softening at 100 degrees or so is undesirable in your application, you could try a higher molecular weight.
I have requested that doubletwist add STL to their podcast directory. We hope that it will appear shortly for you.
I have a new Android 4.0 ICS tablet - but can't seem to find Shoptalk Live no matter how I search.
My podcast viewer is DoubleTwist
How do I subscribe to STL?
Thanks for any help...
13 is up!
It may surprise, but Van Dyke Restorers has the Acorn line of black iron H-hinges, latches, butterfly hinges, etc. Some are expensive - but others - if you dig for them - are more reasonable.
I bought H-hinges and a couple latches for a version of Mike P's Chimney cupboard - quite nice for the $$. Come with black screws, too.
There was some confusion about how a pacifist group like the Shakers would contribute to the war effort. There were humanitarian concerns as well in terms of ambulances, ships for food and medicine and building materials for reparations. Not everything was used for bombs or bullets.
Sorry about the delay on the streaming link. I had a two hour drive back from FW Live - arrived home to find a sick baby that pretty much kept us up all night. Ugh.
Anyhow, enjoy the show!!!
jcwnr: Looks like its been posted to iTunes. But to access it, it says I need to install iTunes 80MB bloatware for W7 64-bit. Trying that gets message that its going to mess with my OUTLOOK somehow. Killed installer then and there.
Hopefully direct link will be posted later today...
Ed.. its great you post on iTunes for those that use it - but there are at least some (one?) of us that won't 'touch it with a 10' pole' - so please keep up the FWW direct links!
7:55 PM in Illinois. Is there a link that I cannot see? Where are you guys?
Its 8:00PM EDST Sunday 8/5 - and no link that I can find to ST 12.
What clamps to have and why you should have them
Make something fun while learning new skills
Fast, fun approach to making a comfortable, casual seat
In this video Michael finishes the first of the three boxes. Gluing-up, planing, sanding and finishing bring a new piece of art to the world.
In this video Michael starts work on the second box, a carved and painted Saddle lid box.
Michael begins carving the saddle lid box with his ripple pattern along the top. Then turns to his 5/30 gouge to texture the sides of the box. This isn't work…
Become a member today and get instant access to all FineWoodworking.com content!
Plus tips, advice, and special offers from Fine Woodworking.
Our biweekly podcast allows editors, authors, and special guests to answer your woodworking questions and connect with the online woodworking community.
Browse our collection of hundreds of quality plans including Shaker furniture, Arts and Crafts pieces, beds, diy plans, chairs, workbenches, tool storage, and more.
© 2016 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 56%