tag: box


showing 1 - 20 of 43 posts matching oil [X]
 1 2 3 Next > 
Sort By:


Subscribe to RSS feed
American cherry wood Ditty box

American cherry wood Ditty box

A sea captains Ditty box built from American Cherry wood. Dimensions: 20" by 10-78" by 7-1/4" . Inside finish: Watco Danish Oil natural with water based Polyurethane over. Exterior finish: Watco...

view details
Cremation Urn

Cremation Urn

Built this urn for my friend's father who passed recently. I used maple for the sides. They had some very nice figure. Hand cut dovetails. The lid is spalted maple surrounded with walnut and maple...

view details
Boxes

Boxes

1 comment

Since my pile of cut off lumber has slowly started to take over the shop I thought I would build a few boxes with it and practice some techniques that I have wanted to try. It is also a great way to...

view details
Veneered Small Box

Veneered Small Box

Small veneered box made with cutoffs. Nice break to build something small after building something big.

view details
Jewelry Makers Toolbox - mineral stained walnut with curly maple

Jewelry Maker's Toolbox - mineral stained walnut with curly maple

I designed this for my daughter, Erin. It is a jewelers tool box for today's hobbyist jewler. The chest stands 50 inches tall with a 24 inch by 24 in base. There are two sizes of drawers with up to...

view details
Æteriske Box

Æteriske Box

1 comment

Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside. Inspired from a James Krenov piece. Made with...

view details
Waterfall Jewelry Box

Waterfall Jewelry Box

Waterfall Jewelry Box  The Waterfall jewelry box project is a typical proof of three elements of creativity which are copying, transforming, combining,. Designed and made by Vejdi Avsar. Craftsmen...

view details
My students works

My students works

3 comments

Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...

view details
Singa me a Songa

Singa me a Songa

5 comments

Charlestonian musician and drum maker Adam Crowell designs great-looking and great-sounding wooden tongue drums. Check out his videos here.

view details
Cantilever Jewelry Box

Cantilever Jewelry Box

7 comments

This is my attempt at making a box float. I used a similar curve as seen in my Chou Chair design. I used a nice figured Western maple. Notice how I carried the figure from the lid right downnbspto...

view details
Memorial Box

Memorial Box

1 comment

Memorial Box for my niece Made with Walnut and County Maple Finished with Linseed Oil, Tung Oil and Beeswax

view details
Tool Box : apprentice piece in oak

Tool Box : apprentice piece in oak

4 comments

Well if an architect can do an aprentice pieece at 50!.  I based them (one for the Mrs and one for me) on the ubiquitous design with machine cut dovetails on the drawers. Oak and Maple with oil...

view details
Box made of Paduck

Box made of Paduck

1 comment

We can manufacture custom Boxes carved and uncarved, Doors, Trim, Signs, Plaques, Tabletops and Panels, Pet ash repositories. Please e-mail me and provide any feedback you deem helpful...

view details
Built-in Cherry Office - Desktop Organizers

Built-in Cherry Office - Desktop Organizers

One of pair of old-school desktop organziers. Part of a rear desk unit built in to a full floor matching home office in Brookline Ma. Cherry with padauk accents, hand-rubbed oil and wax finish...

view details
Bandsaw Box

Bandsaw Box

3 comments

This is the 1st bandsaw box I ever made. I learned the technique for making bandsaw boxes using this design and instructions provided in a woodworking magazine. It is made from Walnut. The drawers...

view details
Credenza

Credenza

3 comments

soft close undermount hardware for drawers and hinges

view details
Walnut & Bloodwood Necklace Chest

Walnut & Bloodwood Necklace Chest

3 comments

Built to match a smaller jewelry chest of the same design and materials, this chest was made at the request of a client who wanted a larger chest made expressly for necklaces. The chest is made of...

view details
Jewelry Box

Jewelry Box

1 comment

A Jewelry Box made as a gift for my friend on her 19th birthday. 

view details
Reclaimed  Teak Wood Fly Box

Reclaimed Teak Wood Fly Box

5 comments

Salvaged Teak wood timbers from an old ship that have been reclaimed into fly fishing boxes. Fly box is made of Teak Wood, a unique wood used in many fine furniture pieces.

view details
Box from my woodpile

Box from my woodpile

1 comment

When they delivered my firewood, I pulled all the walnut pieces that came off the truck.  After the wood had dried out, I made several nice boxes from the ex-firewood.

view details
showing 1 - 20 of 43 posts
 1 2 3 Next > 

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

358785 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

mebeljepara mebeljepara
joined Oct 22
CSKRao CSKRao
joined May 27
JoeKulesza JoeKulesza
joined Jul 11

MVSteve MVSteve
joined Mar 30
KenGroves KenGroves
joined Feb 6
Rob_Appelman Rob_Appelman
joined Oct 12


Create your profile now!