showing 1 - 16 of 16 posts
I am a guitar enthusiast and when I saw a "new old stock" Gibson guitars headstock overlay on Ebay I thought that it would look good incorporated into a desk box.
The box itself is made of...
Waterfall Jewelry Box
The Waterfall jewelry box project is a typical proof of three elements of creativity which are copying, transforming, combining,. Designed and made by Vejdi Avsar. Craftsmen...
The name of this piece is Whale Migration
The box dimensions are 14" wide, 6"high, 5"deep.
Type of wood used is Sugar Maple and Bolivian Rosewood
The drawers are lined with suede material
This is a new style/technique for me in an attempt to keep the final product as close to O.E. (original equipment) as possible.
The branch (O.E.) opens the lid for access to the upper compartments. ...
This was a "one-time" project. Sanding 150+ pieces became tedious, but, the shop always had a pleasant fragrance! Some sapwood was punky so epoxy, plus sawdust, came into play. Time...
Jewelry box designed to hold a lot of jewelry -- it has two storage trays inside, the top one removable. The box is particularly suited for a bride since it has special storage for the wedding...
A few years ago my wife needed a jewelry box, and at the same time I was starting to mess around with finger joints. I thought it might be interesting to bring the fingers of the drawers all...
This is a 12x7.5x4.5 jewelry box, made from river birch. The top handle and top edging is banded with mahogany. Purple heart pins hold together knuckle joints at each edge, while the inside is lined...
Jewelry box created from bird's eye maple veneer and solid walnut sides and handle. The bottom is 1/4" birch plywood. The design is from Bill Hull. The finish is a lavender scented wax.
This is my latest project. It is an Asian themed jewelry box that my wife and I designed together. It is made of meranti for the case, birdseye maple for the door, drawers, and back, and bloodwood as...
This jewelry box is titled “Joliet” for Joliet, Illinois and is constructed from Maple and Purple Heart. All 12 edges are banded with hand cut Purple Heart. In addition, the the top is a...
This box is lacewood and purple heart. The branches are wenge and the leaves are cocobolo. The handles were inspired by James Krenov and are the runners for the drawers. The drawers are maple...
This box is made out of maple and has a carved leather panel on the top, bowtie jointer for the lid, dovetail keyed miters for the box. The marquetry is inlayed in. Everything on this box is...
I made a total of four of these jewelry boxes. They were Christmas presents for my wife and daughters. It is my own design and I used Sketchup for the original layout. This required...
The design for this jewelry box was inspired by a design by Ryan Shervill. The main body is constructed out of maple while the legs and frame for the top are constructed out of...
showing 1 - 16 of 16 posts
Save up to 51% on Fine Woodworking
Become a Better Woodworker