Subscribe to RSS feed
Desk
2 commentsThe desk is made of solid African padauk and hard maple. In the joints pins are router cut and tails are hand cut. Breadboards are tenoned and glued only in the middle to allow the top...
view details
Hall table
3 commentsA hall table made from Sydney blue gum and silver ash. This was designed as an exercise in dovetails. Every joint is a dovetail of some kind. The breadboard ends are sliding dovetails; the rails...
view details
Ebony and Maple Entry Way Table
This arts and crafts hall table was made from maple and ebony and crafted on Google Sketchup. The dovetails are handsawn, the mortises are hand-chiseled. This is the first piece of...
view details
coffee table/ stereo rack
I small table/desk I did as a project at a woodworking school, as part of my 3 1/2 years of training to become an organ builder. I did the design myself and it's oak all the way through.
view details
Chess Table, Chairs & Chess Pieces
9 commentsThis is the first of three sets that I made. I made this set ten years ago. The other two I made seven years ago. All three sets are made out of American Black Walnut, & Hard...
view details
Rustic Dining Table with Knock-down Base
Rustic dining table with knock-down base featuring breadboard ends, integral through-tenons, and loose wedge/tusk tenons.
view details
Demilune Tables
I designed and built these demilune tables for my wife and my two daughters. They are 24" high by 26" wide by 13 1/2" deep. They're constructed in black walnut, and finished with four...
view details
Gamble House Entry Table
1 commentMy interpretation of the Greene and Greene/Gamble House entry table Made of cherry with ebony accents Drawer joinery accomplished with techniques similar to box joint joinery first by roughing...
view details
Wormy Chestnut Kitchen island
4 commentsThis kitchen island is made almost entirely from reclaimed lumber. Wormy chestnut, salvaged from barn sheathing, makes up the body of the island. The lower shelf is made from...
view details
Small Table
The design was inspired by the materials (or lack there of), a small piece of oak, two small pieces of walnut, and an old, old piece of 2x4. It doesn't get any simpler that this. The walnut edges of...
view details
Walnut and Maple Night Stand
1 commentI built this night table in my garage in the evenings while taking my first year of cabinetry schooling last fall. The design was inspired by my late uncle who first attracted me to...
view details
End Table
Floating style top of mahogany with pine shoji style legs. All through mortise construction. The top is in two pieces.
view details
Night Stand Table
This night stand is made from red oak and walnut. The legs have a strip of walnut laminated in their center. The walnut drawer front is accented by oak through dovetails. The lower shelf is cut away...
view details
bent leg coffee table
Cherry coffee table. Bent leg lamination. Snakewood accents and inlay.
view details
Gamble House entry table
6 commentsThe Gamble house entry hall table is a nearly perfect piece of furniture. While my somewhat smaller implementation is less perfect than the original, after several years it still gives me...
view details
Mission-Style Family Altar
Both the altar and the cross are constructed of Quarter-Sawn White Oak. The top of the altar is book-matched. Each leg of the altar is constructed in true Stickley-style so that each side exhibits...
view details
Congratulations to our winner!
Congratulations to our winner David Mathias from Dublin, OH. Click here to view his Gamble House Entry Table
