Replies

1. 
   Lightman | Dec 26, 2004 10:47pm | #1

   Sawdust,

     I have the G0555 14.  it's been very good so far. Had it for year and a half.  Pd 375 + tax.  Like it so far.

   Jimmy

   "as always I wish you enough"

2. 
   Lightman | Dec 26, 2004 10:48pm | #2

   forgot, the ball bearing guides have worked flawlessly so far. Buy the better of the 2 saws

   Jimmy

   "as always I wish you enough"

3. 
   EdKelle | Dec 27, 2004 07:26pm | #3

   Hey Steve,

   Yup prices are going up. I was actually hoping for an end of year sale but just the opposite will happen. So I ordered mine last week after we left the shop. Hoping it should come in late this week. Yes I went for the 17" and also got a mobile base too. I keep hearing great things about Grizzly. Ive got all the contact info on the shipping company they use to LI so if you want it let me know. I have a big hand cart if you need help moving it when it arrives. Mine is going to be a real handfull.

   Good luck
   Ed

4. 
   plumber1 | Dec 28, 2004 07:31am | #4

   I have a Grizzley 14 1/2" Z model and it works pretty good.  I do recommend the bearing guides.  I did have a problem with the guides holder being made from pot medal and very thin walled.  It failed when I was tightening the thumbscrews.   I would recommend beefing up the holder with JB weld epoxy metal as soon as you get yours to reduce the possibility of a failure in the future.

    

   Plumber1

5. 
   Garry | Dec 28, 2004 04:53pm | #5

   I also have the G0555 14" and todate am satisfied. about 6 months after I received the saw the upper guide bearings froze up but Grizzley quickly sent out a replacement set and have been doing well for about a year now. I have the riser kit installed and do quite a bit of resawing and there has never been a lack of power as long as common sense is used.

   I have seen ads lately that post the price of the saw at 425.00 so you may be too late to get the discount.

   Garry

    

    http://www.superwoodworks.com