Shop Storage And Furniture - Page 4 of 31

Ep 13b: Frame and Panel Door – The Raised Panel

April 11, 2017

Work continues in the machine room making the raised panel, with a clever tablesaw jig that not only maintains accuracy, but safety as well.
Ep 13a: Frame and Panel Door – Sizing the frame

April 11, 2017

Matt begins the work on the door by making the mortise and tenoned frame.
Ep 12: Drawer Fitting

April 4, 2017

The way that drawers fit can make or break a piece. In this video, Matt shows you how to perfectly fit the assembled drawers to your case opening, for drawers that will look great and function properly for years to come.
Candy tin stores small rag for oiling hand tools

March 29, 2017

I avoid corrosion on my hand tools caused by finger oil or moisture in the air by wiping them down with oil after I use or sharpen them. But sometimes…
Used brake discs make great bases for shop stands

March 29, 2017

The best and cheapest bases for workshop support stands I have found are scrap vehicle brake discs. They come in a range of sizes and weights, and have threaded holes…
Ep 11: Half-Blind Dovetailed Drawers

March 28, 2017

In this video, Matt takes some of the lessons learned in episodes 3 & 4 and builds on them to demonstrate the North Bennet Street method for the half-blind, or half-lapped, dovetails on the toolbox drawers.
Ep 10: Drawer Layout

March 21, 2017

In this episode, Matt begins on the drawers, fitting the fronts and laying out for the half-blind and through-dovetails.
Ep 9c: The Dovetailed Divider

March 14, 2017

In this episode, Matt finishes the dovetailed partition, and glues in the dividers finishing off the internal structural elements
Ep 9b: The Web Frame Dadoes

March 14, 2017

In this video, Matt tackles the first part of the drawer partition, the dado, using only hand tools.
Ep 9a: The Internal Elements

March 14, 2017

In this episode Matt adds haunches to the dividers and fits them to the case dados. He also shows how to create the bottom drawer runner.

No results found.