Shop Talk Live- Page 5 of 26

Fine Woodworking

STL204: Don’t Shoot Your Miters

December 6, 2019

Tom, Mike, and Barry discuss shooting miters, inlaying, scraper sharpening, and when to baby the burr, and Tom shows Ben up by doing both favorite tools and techniques.
STL203: Finding holly for inlaying and banding

November 22, 2019

Bob, Mike, and Ben discuss sources for holly, what a listener can do with 1/8-in. ebony, how close is close enough when setting up a jointer, and a listener asks how you can prefinish AND soften edges after a piece is assembled
STL202: This guy found a workbench on the side of the road!

November 8, 2019

Anissa, Barry, and Ben discuss radial arm saws, side-of-the-road workbenches, dowel joints, milling wide boards, and suffer dramatic smooth moves
STL201: Friends Don’t Let Friends Go Metric

October 25, 2019

Mike and Ben discuss first handplane purchases, tool chest construction, calipers, sourcing riftsawn oak, and English-style tablesaw fences. And Mike tries to talk Ben out of switching to metric.
STL200: Live from North Jersey

October 11, 2019

Tom, Mike, and Ben take the show on the road and answer questions from the North Jersey Woodworkers Association live
STL199: In Defense of Tail Vises

September 27, 2019

Bob, Mike, and Ben discuss workbenches and vises, a listener's walnut dilemma, spline jigs, and their all-time favorite tools
STL198.5: Bonus Episode with Tim Rousseau

September 20, 2019

While recording the Modern Desk video workshop, Tim Rousseau and Ben sat down to talk about finishing, resawing, veneering, and the Danish Modern aesthetic
STL198: How much lumber is too much lumber?

September 13, 2019

John, Barry, and Ben discuss workbench stretchers and basement shops vs. garage shops, and a new chapter begins in the round vs. square mortise debate
STL197: Clean miters that are actually strong

August 30, 2019

Mike, Anissa, and Ben discuss various case miter options, veneering curved legs, buying old machinery, painting MDF, and their all time favorite tools of all time… for this week
STL196: Is It Time to Upgrade Your Planer?

August 16, 2019

Mike, Barry, and Ben discuss planer upgrades, chip-out prone furniture parts, benchtop tablesaw concerns, and write the next chapter in the rabbet block plane debate

No results found.