To test bandsaw blades for resawing, we selected 1/2-in.-wide blades, a size well suited to resawing on a 14-in. bandsaw. The same saw (Delta model 28-241) was used for all of the tests. When it comes to resaw blades, most woodworkers have only three demands: that the blade be reasonably fast and that the cut be both reasonably flat and reasonably smooth. To measure speed, we timed low long it took to cut through a section of  9-1/2-in.-wide soft maple, with short times equating to fast-cutting blades. To assess flatness, we measured the amount of barreling on the test block using a straightedge and a set of feeler gauges. To find the smoothest cutters, we measured how much sanding had to be done to remove the blade marks. The Starrett Woodpecker Premium blade was one of two blades that stood out for speed, requiring on average only 13.69 seconds to make the 12-in.-long cut.

Fine Woodworking Recommended Products

Freud Super Dado Saw Blade Set 8" x 5/8" Bore

Leaves a dado with a flat bottom and even performs excellent on plywood and melamine.

Buy at Woodcraft

Veritas Precision Square

This precision square is incredibly versatile, from checking squareness to dialing in machine setups.

Buy at Lee Valley

Rockler Dust Right 650 CFM

While all five of the smaller units will collect chips efficiently when deployed properly, the 3/4-hp Rockler was just a bit more powerful in our suction test.

Buy at Amazon