To test bandsaw blades for resawing, we selected 1/2-in.-wide blades, a size well suited to resawing on a 14-in. bandsaw. The same saw (Delta model 28-241) was used for all of the tests. When it comes to resaw blades, most woodworkers have only three demands: that the blade be reasonably fast and that the cut be both reasonably flat and reasonably smooth. To measure speed, we timed low long it took to cut through a section of  9-1/2-in.-wide soft maple, with short times equating to fast-cutting blades. To assess flatness, we measured the amount of barreling on the test block using a straightedge and a set of feeler gauges. To find the smoothest cutters, we measured how much sanding had to be done to remove the blade marks. The SuperCut Hawc Pro did well in the speed test (20.26 seconds) but poorly when it came to flatness and smoothness.

Fine Woodworking Recommended Products

Oneida’s Super Cell Dust Collector

30-Gal with Wall Mount

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon