• PRINT
  • ADD TO FAVORITES
  • Pin It
Multi-Router

The JDS Company - Multi-Router

With its tilting table and smooth cutting action in any direction, any mortise is a cinch.

$2,750 (As of 7/1/2009)

Be the first to review this Tool

Editor's Review: Mortise and Tenon by Machine

by Tim Albers

review date: July 1, 2009

I've had the opportunity to work with some great mortising machines over the past couple of months, but the Multi-Router is my favorite. However, the nearly $3,000 price tag (router not included) is a substantial outlay. The Multi-Router is elegantly simple: A horizontal table holds the workpiece and moves in the X and Y directions, and a vertical table holds the router and moves in the Z (up and down) axis.

As you would expect from a higher-priced machine, the construction, precision, and smoothness are exceptional. Even with a large workpiece and a heavy cut, it moves effortlessly.

Hold-downs and workpiece stops are just as good. I especially liked the stops for table motion, which allow you to use calipers to set up precise cuts, and feeler gauges to fine-tune them.

There is a separate lever for X, Y, and Z travel, which means you can make tenons, for example, with a single setup. You might not bother, though, since loose-tenon joinery is also easy. The workpiece table tilts in two directions for compound mortises up to 45°.

This is a true X-Y-Z milling machine and thus can make all kinds of precise cuts on small and large parts; the only limit is your imagination.

This jig is available for about $2,750 from www.jdstools.com

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer The JDS Company
Manufacturer's Web Site www.jdstools.com
Manufacturer's Phone Number 800-480-7269

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 51% on Fine Woodworking


MEMBERS ONLY