• PRINT
  • ADD TO FAVORITES
  • Pin It
G2 Sanding Disks

Shopsmith - G2 Sanding Disks

Shopsmith G2 sanding disks come in eight grits ranging from 40 to 320 and all feature a wear-resistant, plastic film backing with an aluminum-oxide abrasive and an anti-clog coating.

$15 for 15-pack (As of 10/25/2012)

Be the first to review this Tool

Editor's Review: Tool Test: Sanding Disks

by Andy Beasley

review date: October 25, 2012

The new G2 sanding disks from Shopsmith never seem to wear out. That’s good news if you’re using them; not so good if you’re testing them. Thanks to my earlier evaluation of 5-in. sanding disks (FWW #222), I was the obvious (most gullible) candidate to repeat the tests on Shopsmith’s newest offering. The disks come in eight grits ranging from 40 to 320. All feature a wear-resistant, plastic film backing with an aluminum-oxide abrasive and an anti-clog coating. Compared to the eight types I tested earlier, the G2 disks lasted longer and removed more material (for example, the 80-grit disk outlasted the previous test average by a factor of six!). Surface quality was uniformly good. But there’s a downside: the disks are pricey and they cut slowly. When matched against the cost-effectiveness and speed ratings of the competition, the G2 disks were middle-of-the-pack performers.

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer Shopsmith
Manufacturer's Web Site http://www.shopsmith.com
Manufacturer's Phone Number 800-543-7586
Grit 40 to 320

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 51% on Fine Woodworking


MEMBERS ONLY