• PRINT
  • ADD TO FAVORITES
  • Pin It
Doweling Jig

Rockler - Doweling Jig

This doweling jig from Rockler comes in 3⁄8-in., 1⁄4-in. and 1⁄2-in. sizes.

$14 (As of 5/31/2012)

Be the first to review this Tool

Editor's Review: The Dowel Joint

by Asa Christiana

review date: May 31, 2012

If you've seen my latest video project (“Getting Started in Woodworking, Season 3,” free at StartWoodworking.com) or my recent article on doweling (Fundamentals, FWW #222), you know I’m a fan of the little $14 doweling jig from Rockler. My only complaint was that it came in just one size: 3⁄8-in.

Rockler fixed that by offering the same jig in 1⁄4-in. and 1⁄2-in. sizes, meaning you can build a much wider range of furniture and furniture parts, from thin frames and boxes to big leg-to-apron joints. The 1⁄4-in. jig will center a dowel in 1⁄2-in.-thick pieces, the 3⁄8-in. model works perfectly in 3⁄4-in. stock, and the 1⁄2-in. jig is designed for 1-in.-thick workpieces. Of course, as I demonstrated in the videos, you can easily add a shim to change that distance, offsetting a leg and apron, for example.
I love the simplicity of these jigs.

You can either use the lines on the jig to align it with layout marks, as when lining up dowels for a panel glue-up, or line up the edge of the jig with the end of your stock. The jig only does two holes at once, but for a row of dowels you just drop a dowel into the last hole you drilled, which spaces the next one perfectly. These jigs are very solid and accurate, and you could build a houseful of furniture with just a couple of them and a cordless drill. I can’t think of a cheaper, easier method.

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer Rockler
Manufacturer's Web Site www.rockler.com
Manufacturer's Phone Number 800-279-4441
Materials N/A

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 52% on Fine Woodworking


MEMBERS ONLY