• PRINT
  • ADD TO FAVORITES
  • Pin It
Center Finder/Caliper Gauge

Rockler - Center Finder/Caliper Gauge

Small steps, graduated in 1/8-in. increments, make setting calipers a breeze.

$6 (As of 12/9/2010)

Be the first to review this Tool

Editor's Review:

review date: December 9, 2010

Rockler's Center Finder/Caliper Gauge makes quick work of setting dial calipers and finding the centers of spindles. I commonly adjust my calipers by sight using a ruler or vernier caliper, which can be imprecise, especially if you’ve rounded the tips of the calipers to prevent them from marring or catching the workpiece. But the caliper gauge turns the process of setting the calipers into a function of feel rather than one of sight. Because the caliper tips seat squarely at each measurement increment (from 1/8 in. to 5 in.), the gauge can be real handy for beginning turners.

The center finder is a breeze to use, too, and it works for square or round spindle stock.

Editor Test Results:

Manufacturer Specifications

Manufacturer Rockler
Manufacturer's Web Site www.rockler.com
Manufacturer's Phone Number 800-279-4441

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking


MEMBERS ONLY