• PRINT
  • ADD TO FAVORITES
  • Pin It
GraBit Damaged Screw Remover

Prazi Inc. - GraBit Damaged Screw Remover

Bit removes stripped screws regardless of size or drive configuration

$25 for a three bit set (As of 11/1/2007)

Be the first to review this Tool

Editor's Review:

by Asa Christiana

review date: November 1, 2007

The GraBit works with any reversible drill to remove screws with stripped heads, regardless of size or drive configuration (Phillips, star, square, hex, and more). It works on bolts with snapped-off heads, too.

The two-sided bits lock into the damaged screw head in two simple steps: Use the stubby drill-bit end to hollow out the screw head. Then use the threaded end of the bit, with the drill running in reverse, to extract the screw.

In our test, however, it didn’t extract drywall screws. Those screws are hardened, so the GraBit couldn’t cut into them.

A set of three bits handles screw sizes from No. 6 to No. 14. The set sells for $25 at www.shoppraziusa.com.

From Fine Woodworking #194

Photo: Tom Begnal

Editor Test Results:

Manufacturer Specifications

Manufacturer Prazi Inc.
Manufacturer's Web Site http://www.shoppraziusa.com
Manufacturer's Phone Number 800-262-0211

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking


MEMBERS ONLY