Paddock Tool Co. - Replacement Bearing Assembly Guide Model 10 - Fine Woodworking Tool Review
  • Pin It
Replacement Bearing Assembly Guide Model 10

Paddock Tool Co. - Replacement Bearing Assembly Guide Model 10

Paddock Tool Co.’s model guides can be installed on any machine having at least 2 in. from the back of the blade to the top of the guide post.

$265 (As of 4/1/2001)

Be the first to review this Tool

Editor's Review: Choosing Bandsaw Guides

by Tim Albers

review date: April 1, 2001

Bandsaw guides typically have one assembly above the table and one below. The bottom assembly is fixed, while the top assembly travels vertically on a guide post. Each assembly contains three support elements: two side, or lateral, supports and one rear support.

Some guides use blocks to provide lateral support, and others use bearings. Bearing guides are further divided into American and European styles. American-style bearing guides support the blade with the curved outside surfaces of the bearing, rolling along the blade as it travels by. European-style bearing guides contact the blade on their flat side-faces, potentially offering more support area but also more friction and noise.

It's important to choose the bandsaw guides that are appropriate for your type of woodworking. Whether you are a luthier using your bandsaw for precision resawing, a toy builder making hundreds of curved cuts, or a furniture maker doing some of both, there are bandsaw guides that are right for you.

Paddock Tool Co.'s replacement bearing assembly for resawing was easier to adjust than Guidalls, and it was less prone to pitch buildup.

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer Paddock Tool Co.
Manufacturer's Web Site
Manufacturer's Phone Number 866-340-3234
Blade Size 1/4 in. to 3/4 in.
Sizes Guide size: #00 to #1 equivalents
Compatiblity N/A

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking