• PRINT
  • ADD TO FAVORITES
  • Pin It
Kombi Combination Machine 410 Profit

Knapp - Kombi Combination Machine 410 Profit

This combination machine from Knapp, distributed by Laguna Tools, has been upgraded since our review. It now sells under a different model number with additional features and a higher price tag.

$15,150 (As of 10/25/2005)

(1 user review) Write a Review

Editor's Review:

by Asa Christiana

review date: October 25, 2005

The Knapp is an industrial machine, built to withstand a lifetime of abuse in European cabinet shops. The planer-jointer can be unbolted and used as a separate machine, a nice touch. Also, the Knapp has the most cast iron in its massive arbor and spindle assemblies. It takes up to a 14-in. blade (the others accommodate 12 in.), and a tilting shaper spindle is standard (an option on other machines). It has separate fences dedicated to ripping and jointing. The Knapp router spindle is the only one that turns at the ideal speed for routing: 23,000 rpm. It also accommodates a full dado head, giving you two options for dadoing.

Its switches were heavy-duty and conveniently mounted, and the ripping and jointing fences were the most rigid. The height adjustments of the saw, shaper and planer bed were the smoothest and most solid of any machine tested. Although it didn’t need much tuning, this machine was the most easily tuned up and adjusted for flat and square. Also, all of the dust-collection ports are on the same side of the machine—the back.

The wide sliding table was by far the most massive and smooth. It was deadly accurate throughout its stroke, with positive fence stops built in at common angles. The round bearings run against round bars for point-to-point contact designed to resist fouling by dust.

I preferred the Knapp’s standard crosscut extension table over any of the others. It requires no outrigger to support it. It is lightweight aluminum but dead-flat and rigid enough to support large panels.

The only design flaw I encountered was that the cam-driven hold-down on the sliding table pushed the stock forward when it was engaged. While these hold-downs are not necessary for most operations, they increase the accuracy of miter and joinery cuts on the saw, and tenoning on the shaper.

Editor Test Results:

Manufacturer Specifications

Manufacturer Knapp
Manufacturer's Web Site
Manufacturer's Phone Number
1/19/2006

In April this year, I will celebrate the third anniversary of having had the Knapp 410 Profit in my shop. It is the best piece of equipment that I have ever purchased and used. I am a semi,professional furniture maker with a small - (950 sq. ft.) one man shop. On the 410 I can rip and cross cut to accurate size. I can joint, thickness plane, mortise, bore, shape and rout with excellent results.I rate and recommend the Knapp 410T with absolute confidence that the owner will be happy.Stig LundbergValley Center, CA.

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 52% on Fine Woodworking