G0675 Jointer/Planer Combo Machine - Fine Woodworking Tool Review
  • Pin It
G0675 Jointer/Planer Combo Machine

Grizzly Industrial - G0675 Jointer/Planer Combo Machine

Grizzly's G0675 jointer/planer combo machine features a two-knife cutterhead that can force a cutterhead to make fewer cuts per inch.

$1,125 (As of 2/9/2012)

Be the first to review this Tool

Editor's Review: Tool Test: Jointer/Planer Combination Machines

by Roland Johnson

review date: February 9, 2012

The smaller of the two Grizzlies, the G0675 still offers wide jointing and planing capacity in a much less expensive package. Like the 12-in. Rikon, the G0675 features a single-table changeover. It’s simple but slow due to the high number of cranks needed to raise and lower the planer bed, and the design of the dust chute.

It’s the only machine I tested that has a two-knife cutterhead, a design drawback that can force a cutterhead to make fewer cuts per inch. The Grizzly compensates by spinning the cutterhead at 6,500 rpm, slightly faster than three-knife cutterheads, but the two knives are bound to dull more quickly than three would. For the price, it represents a solid value and would make a good pick for a hobbyist woodworker.

read full review

Editor Test Results:

Changeover time 63 seconds from jointer to planer, 70 seconds planer to jointer

Manufacturer Specifications

Manufacturer Grizzly Industrial
Manufacturer's Web Site www.grizzly.com
Manufacturer's Phone Number 570-546-9663
Cutterhead 2-knife, HSS
Replacement Knives N/A
Other Accessories N/A

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking