• PRINT
  • ADD TO FAVORITES

Festool - Plunge Cut Circular Saw ATF 55

Festool has discontinued this version of its plunge-cut circular saw and guide, and replacing it with model No. TS 55 EQ.

$410 (As of 10/1/1998)

(3 user reviews) Write a Review

Editor's Review: TS 55 EQ Circular Saw

by Gary Katz

review date: October 1, 1998

The name Festool is unfamiliar to most U.S. woodworkers, but the company is well-known in Europe where it has been in the power-tool business for about 70 years. A distributor began selling Festool tools in 1997, and I tried out a plunge-cut circular saw, which comes with a carbide-tipped blade, aluminum guide and case.

Out of the box, the ATF 55 and guide were ready to go, no assembly required. I used the tool on a job trimming laminate-covered doors. The tool had power to spare, but what really surprised me was how little noise it produced.

The saw is equipped with an electronic speed control and soft start. When you press the trigger, there’s no wrist-jerking roar. The machine has six speeds, which allows you to dial down the rpms when cutting easy-to-melt materials such as plastics. The saw also has an electric brake system that brings the blade to a stop within two seconds. And the tool is equipped with a retractable splitter, which helps prevent blade binding and kickback.

In use, you set the base on the workpiece, press the trigger and push on the handle. The spring-loaded base retracts, and the blade plunges into the stock. Depth of cut is adjustable. Because the saw is made in Germany, it’s built on a metric framework. The number 55 in the model name refers to the depth of cut in millimeters, or about 2-1/4 in. The blade is 160mm dia., or about 6-1/4 in. Because the tool’s arbor is 20mm, you have to get a replacement blade from Festool.

It takes some getting used to the tool’s design. It suffers from a problem common to many circular saws: It’s difficult to see where the blade meets the pencil line when cutting freehand. A plastic window is fitted in the side of the saw guard, but I found it of little use. Although this saw is not designed for the task, I tried cutting some 2x4s, framer style, with the stock resting on my foot. It’s awkward because of the downward pressure required to retract the base. Festo also makes circular saws without the plunge feature, suitable for framing work.

But the guide system is the best I’ve ever used. The saw’s base is slotted to fit over a rail on the guide body, which has an anti-slip sole. An elastic strip on the edge of the guide serves as an anti-splinter device, and it really works.

The Festool saw does a lot of things better than most saws, but with performance comes a big price. The ATF 55 and guide is the most expensive circular saw I’ve ever put my hands on.

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer Festool
Manufacturer's Web Site www.festoolusa.com
Manufacturer's Phone Number 888-337-8600
Blade Size 6 1/4 in. dia.
Maximum Depth Cut 2 1/4 in. deep
Amps 10 amps
9/18/2007

To hell with the cost, this is a great tool. It does the job, any job with less noise and hassle. I've used it to joint board edges with great success. The guide system is superb. Using a quality tool makes a huge difference.
8/4/2006

This particular saw (now discontinued, but any Festool circular saw us the same for most purposes) is among those tools that can change a workshop. I've given seminars on setting up shop, where I have always said to start with a bandsaw; the tablesaw can wait. Of course, few listen, wanting that big piece of cast iron whenever possible. The Festool system almost makes a tablesaw superfluous. Instead of either getting a big panel type saw, or getting a lot of auxiliary tables to cut sheet goods, with a Festool, you keep the sheet on the ground (under a piece of cheap foam insulation), set up the guide, with no clamping needed, and cut away. Use their protractor, and cut it at any angle. Use a set up table, or Festool's own table, and you have a compound chopsaw and workbench combined in one. The saw is smooth, has an excellent variety of blades--made by Festool, and their blades are really top notch--the dust pickup is as good as you will get, and it comes as a plunge cutting model with a splitter. It's expensive, and yet I have yet to meet anyone who bought it ever regretting a penny.
6/28/2006

I bought this saw and the 55" guide rail used but in like new condition. This was my first (and so far only) Festool purchase so far. I am nothing but impressed with it and the engineering behind it. It is not a tool I would use every day, but it makes certain operations very easy and repeatable. I anticipate most of its use in cutting down plywood sheets to finish piece sizes before I even carry them into the shop. This saw cuts so cleanly that it is not necessary to cut the pieces wide and trim them down on the table saw. I understand that the new model is even better than this saw, but I am thoroughly pleased with it and do not anticipate trying to upgrade.

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking


MEMBERS ONLY