• PRINT
  • ADD TO FAVORITES
  • Pin It
Tablesaw Tenon Jig 34-183

Delta - Tablesaw Tenon Jig 34-183

Delta’s verison of the heavy-duty jig designed for cutting tenons and other wood joints on the tablesaw.

$85 (As of 2/1/2005)

(2 user reviews) Write a Review

Editor's Review: Tenoning Jigs

by Strother Purdy

review date: February 1, 2005

A pair of vertical handles distinguishes the Delta 34-183 (as well as the Shop Fox and the Woodcraft) from the others in this review. When an angled cut is called for, each of these jigs has a main fence that can tilt the workpiece to the left up to about 18°. Also, using the secondary fence, the workpiece can be tilted forward up to 45°, and an adjustable stop makes it easy to return automatically to the 90° position. You need an Allen wrench to adjust the position of the clamp on these jigs. A knob would have made the process easier.

read full review

Editor Test Results:

Ease of Use N/A
Quality N/A

Manufacturer Specifications

Manufacturer Delta
Manufacturer's Web Site www.deltaportercable.com
Manufacturer's Phone Number 800-223-7278
Positive Angle Stops N/A
Built-in Dust Collection N/A
Type of Adjustments Guide-bar Adjustment: Pin
Compatibility Left- and right-tilting saws with 3/8-in. x 3/4-in. miter gauge grooves
Settings and Stops Adjustable from 45° to 90°
Maximum Capacity Maximum Workpiece Thickness: 3-3/8 in.
Tilt Side: 18°; Back: 45°
3/6/2008

Cheap plastic lock levers. I was aligning the guide bar the instructions say to place it upside down when I did one of the PLASTIC levers broke off. The pointer was cheap not that I would rely on it.
10/25/2007

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 51% on Fine Woodworking