Benchtop Slide Mount - Fine Woodworking Tool Review
  • Pin It
Benchtop Slide Mount

Commerce Welding and Mfg. Co., Inc. - Benchtop Slide Mount

The Benchtop Slide Mount is a heavy-duty pivoting bracket that attaches to just about any bench

$98 (As of 9/1/2009)

Be the first to review this Tool

Editor's Review: Tablesaw Sliding Crosscut Fixture

by Roland Johnson

review date: September 1, 2009

The Benchtop Slide Mount is a heavy-duty pivoting bracket that attaches to just about any bench. A stout one-piece rail system attaches to the bottom of the bench, providing tracks for a roller assembly and swivel plate. It took less than an hour to install the bracket and bolt my bench grinder to the plate. Then I simply slid the tool forward and up on the bench, where it stayed firmly in place. The Benchtop Slide Mount works on benchtop thicknesses ranging from 1-3/4 in. to 4-1/2 in. and accepts tools weighing up to 75 lb., such as benchtop bandsaws, miter saws, and scrollsaws. It sells for $98; go to  or call 800-527-5798.

Easy as one, two, three.
With a tool mounted to the Benchtop Slide Mount, you can...

 store the tool below your workbench...

Slide Mount
then raise it...

Slide Mount
and put it to use on top of your bench. 

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer Commerce Welding and Mfg. Co., Inc.
Manufacturer's Web Site
Manufacturer's Phone Number 800-527-5798 (toll-free) or 214-748-8824 (local)

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking