Spearpoint Marking Knife - Fine Woodworking Tool Review
  • Pin It
Spearpoint Marking Knife

Blue Spruce Toolworks - Spearpoint Marking Knife

The Blue Spruce knife features a versatile blade design and a comfortable turned handle

$45 (As of 5/1/2008)

(2 user reviews) Write a Review

Editor Choice-Best Overall

Editor's Review: Tool Test: Marking Knives

by Steve Latta

review date: May 1, 2008

The marking knife seems like such a simple tool that it would be easy to dismiss it as little more than a blade and a handle. But we all know better: Marking out with a knife instead of a pencil means that you care about the details. So it makes sense to focus on the details when choosing the knife. I gathered 16 different varieties and put each knife through five tests, each a real-world woodworking task relating to scribing, dovetails, mortises, banding, and inlay.

Overall, the Blue Spruce knife scored very highly on the full range of tests. It felt great in the hand, and its long, reinforced spearpoint blade and flat back made it a champ at laying out dovetails. Here's how it performed in my tests:

Scoring a line—With the blade riding against a combination square, I struck a line across 5-in.-wide pieces of walnut and curly maple. I was looking for quality of line in both softer and harder material.
Results: Excellent in walnut, excellent in maple

Dovetailing—I marked out a pin board for a set of narrowly spaced tails across a 6-in.-wide piece of 3/4-in. stock. The narrow spacing tested each knife’s ability to strike a line in confined quarters.
Results: Very good

Laying out for a hinge mortise—I set a 1-in. by 2-1/2-in. hinge against the edge of a walnut board and traced it out. This involves cutting both with and across the grain. I set the marking knife on the edge and cut back to the rear of the plate. Then I removed the hinge and made the lines deeper by running the knife in the channel. This tests the knife’s ability to track in an already established groove.
Results: Very good

Marking out for a banding—I scored one line running all the way around a tapered walnut table leg, pulling the knife away from me. I then ran a second line with the knife coming toward me. This test helped me gauge the ease of handling the knife and whether both sides of the blade could easily be held tight to the work. It also demonstrated how easily each knife could carry a line around a corner.
Results: Very good

Tracing for a bellflower—This is intricate work best done with a thin blade. A line is scored around a small petal and then excavated with a tiny router plane. The knife lines must be precise enough to ensure a snug fit for the inlay and deep enough to provide a stop for the router plane’s iron. The line must be crisp but not wide, or the final recess will be too big.
Results: Very good

In the end, the X-Acto, the Blue Spruce, and the Hock violin knife tied for best overall. I also named the X-Acto best value.

read full review

Editor Test Results:

Manufacturer Specifications

Manufacturer Blue Spruce Toolworks
Manufacturer's Web Site www.bluesprucetoolworks.com
Manufacturer's Phone Number 503-631-7485
Blade Style Spearpoint marking knife
Maximum Marking Reach N/A

Beautiful tool! Stays sharp and easy to use mark out dovetails. If it were $20 dollars cheaper I would have several more!

I have had this tool for over a year and use it for dovetail layout and scribing lines. It works really well, has stayed sharp and feels good in my hand. It's beautifully made. Highly recommend.

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 56% on Fine Woodworking