• PRINT
  • ADD TO FAVORITES
  • Pin It
Tool Carbide-Tipped Countersink Bits

Amana - Tool Carbide-Tipped Countersink Bits

Amana’s countersink bits are the first on the market to have durable carbide-tipped cutters.

$21 and up (As of 6/2/2011)

Be the first to review this Tool

Editor's Review: Expert Lesson: Drill Bits

by Thomas McKenna

review date: June 2, 2011

When I drill countersinks for screws, I have two goals: zero chatter and a clean rim on top. Amana’s new countersink bits (amanatool.com) provide both, but with a twist. Unlike the steel countersinks I’ve owned, which tended to dull quickly, Amana’s countersinks have durable carbide-tipped cutters (the first on the market).

To test their durability and cut quality, I drilled more than 200 countersinks in hard maple, brittle white oak, hardwood veneer plywood, and MDF. Then I used a magnifier to check out the quality of cut. I was impressed. From start to finish, the countersinks were crisp, clean, and chatterfree. The exception was the MDF, which had a bit of fuzz around the rims—easy to clean up, though.

The bits are available for Nos. 4, 6, 8, 10, 12, and 14 wood screws. You also can get countersinks for quick-release hex chucks and versions with tapered drills.

read full review

Editor Test Results:

Bit Diameter Various
Hole Diameter Various
Average Temperature N/A
Entry-Hole Rating N/A
Through-Hole Rating N/A
Chip Clearing N/A
Hole Depth N/A

Manufacturer Specifications

Manufacturer Amana
Manufacturer's Web Site www.amanatool.com
Manufacturer's Phone Number 800-445-0077
Country of Origin N/A
Bit Type Countersink Bits

Click on a thumbnail to see a full sized image

Become a Better Woodworker

Save up to 51% on Fine Woodworking


MEMBERS ONLY