tag: white oak
showing 1 - 20 of 25 posts
1 2 Next >
Q.S. White Oak 4-Panel door. Mortise & Tenon construction.
Rain Glass top panel.
This trestle table is made of quartersawn white oak. The 7/8" thick top was glued up and then trued with handplanes and a furniture scraper. The 3-inch-square legs are glued up and laminated to show...
MARRE LIVE EDGE COFFEE TABLE
Materials: Claro Walnut, Black Walnut
Dimensions: 74"L x 26"W x 15"H
Finish: Natural hand-rubbed oil + wax -- buffed and polished to a satin glossThis...
Based on the Christian Becksvoort design. I modified the dimensions slightly (about 23 inches tall with a 5 1/2 inch apron) to work as a night table in my guest room. White Oak and Black Walnut...
Made from solid sustainable American White Oak, with a wax finish.
Check us out at:
Woodworker: Scott Gibson
When building these kitchen cabinets, writer and woodworker Scott Gibson focused his design efforts on the elements that people will see, including face frames, doors...
This mammoth Shaker-inspired workbench took Stair a year to complete. The woods used are maple, oak, pine, and cherry. The bottom of the bench is painted; while the top has a shellac finish.
This dresser is made from cherry, maple and oak; with rosewood pulls. It is finished with linseed oil and wax.
This piece was primarily inspired by the piano. The client who asked me to make it was musically inclined and wanted a piece of furniture to reflect the contrasting beauty of the piano. A somewhat...
A small living/dining room commanded a versatile table. Only 13" wide, the table can sit 8 comfortably.
Center of gravity is actually lowered when very wide leaves are down. The eight feet make it...
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...
I built this table for a friend of mine . He said he'd like some inlay but wanted it to be
fairly modern looking too.
I think i managed to get a fine finish on the table top. After all the sanding i...
My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...
One day I was picking up some pieces of firewood from my pile and thought I could use this to make a table leg. So as I collected the wood for the fire I would collect pieces that looked good and put...
Knitting chest constructed of white oak and walnut with shellac finish. Drawers are constructed with half blind and through handcut dovetails. The drawer bottoms are installed in drawer slips.
Everything made is of Shaker inspired design. I have made many Shaker pieces over
the years. Oval boxes are made of various domestic and exotic woods.
Shaker rocker construction made easy by using pre-turned dowels.
Save up to 51% on Fine Woodworking
Become a Better Woodworker