My charging station box eliminates the clutter from all the charging cables when charging mobile devices. A 6 outlet plug strip is hidden behind a door in the back of the box. There are two...
I purchased a log of spalted maple and made this table: spalted maple top and walnut base, 48 inches long, 15.75 inches wide, 30 inches high. Top thickness: 1.9 inches
The 'elevated' design of...
The Music Box features the song "Imagine" by John Lennon. The 18 note movement is from TheMusicHouse.com. It is a Swiss made movement by Reuge.
The basic design for the box was chosen by my...
This table was done as a donation to my church. The design is my own and it was constructed from Cherry with a curly maple top panel and walnut inlay. The lettering was done by a friend with a...
Made this box for my Mothers Flute. Its made from Walnut and maple. Hand made Dovetails. Just a little something I decided to do..
The Tower Table is a hall table inspired by the Seattle Space Needle.
The top is of figured Maple base is Walnut.
The curved legs are made of bent laminated slices of Walnut. The outside of the...
Keepsake /jewlery box made from Manitoba maple and walnut .
I love making boxes and have made sevral using this pattern which is very adaptable to different styles and designs .
My dog has sprained her ankles a couple of times jumping off our bed. I built this dresser with stairs and dog bed to place at the foot of our bed so that Maggie could get on and off the bed more...
This solid maple and walnut inlay table uses mortise and tendon joinery. The maple is ambrosia maple cut from a 12 foot 8/4 slab.I went for a floating top design similar to ones seen in this...
I perform this Maloof inspired walnut rocker with some luck, and some personal detail add on.
It take 200H..
Finish with Danish oil and oil-wax.
Dr Richard Zimmermann-Belgium
Maloof (using Brock plans) rocker.
Really fun project. Shaping is fun but tedious, final scraping & sanding takes considerable time, even though I did as much as possible before glue-ups. I...
I have made this for my wife on 10th anniversary 2015.
Maple burl and curly was used in front doors with wenge frame.
Walnut wooden hinges were utilized to install the front doors.
Greene & Greene...
This is a jewelry box I made for my niece upon her graduation from High School. The main body is ambrosia maple with black walnut legs. The top is edge joined claro walnut, the removable tray is also...
This piano bench is a response to the somewhat problematic design paradigm of a typical piano bench, which requires the pianist to stand up from the bench to lift the hinged top in order to extract...
Cocoa Wood Top
The legs are bent laminations, eight plies in total (four in each “half” of the leg).
Large Radius TV Cabinet for 65" TV. Designed and built to fit in the specific spot shown in pictures. Constructed of Walnut and Wormy Maple. Walnut Frame is a bent lamination. The doors and...
Made from figured maple and black walnut. Handles for drawers and doors on the front are cut out of the tree figure.
Woodworking is a great art and hobby that you can quickly turn into business. You need to know that different woodwork projects will have different markets. For instance, if you are making toys, then...
Save up to 51% on Fine Woodworking
Become a Better Woodworker