showing 1 - 20 of 83 posts
frame and panel
1 2 3 Next > Last
A small tool chest, for a small shop. Had some Black walnut boards laying around, and a few scraps of Pine. One sliding tray, and a lift-out tote. Floor of chest is just two pine...
Blanket Box for my daughter. Walnut frame and maple panels.
Finished with shellac. Aromatic cedar inside.
Walnut Key cabinet. Wormy Walnut panel and QSO Shelves. The wee dolphin is carved from beech.
I developed the concept for this table after growing frustrated with our always-cluttered entrance table, which my wife had noticed was also growing a bit tired. The table combines a walnut frame...
This bedroom clothing armoire was constructed as a stacked two piece upper cabinet and lower dresser unit assembly for ease of cross country shipment. It is medium sized for an armoire with basic...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
3-doored sideboard of solid black Walnut.Drawbore pinned tenon and mortise assembly. Open slot mortise door frames.Handles of black Walnut and African Blackwood.Tung oil, Carnauba and Beeswax...
my first proper project and first post on here please give me your opinions. i made this for my girlfriend as a christmas present i used oak, walnut and hawthorne. thanks for looking and have a...
I made this Pennsylvania spice box from plans published in FW #196 by Steve Latta. I modified the feet (I did not like the original flat bracket feet and thus made ogee bracket feet) and the...
This is a Black Walnut Nightstand using the Tim Roussaeu video series design. I built this one with my Festool Domino joiner for the mortise and slip tenon joints,
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
Finding a board of walnut in my stack with these striking patterns made it clear it had to be used for drawers to heighten the effect. Another piece of cherry with a life of its own resulted in the...
The original idea was to make a piece with straightforward sides and curved doors as an eye catcher. I had seen these doors on a piece by Jeff O'Brien and decided to give it a try. Once the doors...
Open floor plan with plenty of windows for natural light and open feel. Bathroom and drafting/sharpening/tool maintenance room. 16' garage door for easy access to shop, and easily accesable wood...
A barrel lid post and panel chest built from Western Walnutand Black Limba. The tray was built from Walnut and Cherry then stained andoiled.Chest dimensions: 33 inches long by 21 inches wide by 21-1/2
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
This bunk bed can be split into 2 seperate beds, the 2 bottom pieces (tall) become the headboard and the 2 upper pieces (small) are install at the other end, I used sugar maple and dark walnut for...
My wife wanted a small but functional desk for our downsized retirement home. Having seen an antique Davenport or Captain's Desk she asked me to design one that would be functional for a home office...
Save up to 52% on Fine Woodworking
Become a Better Woodworker