showing 1 - 20 of 106 posts
arts and crafts
1 2 3 Next > Last
The chest was desgined by the author and completed in 2012.
Dovetailed birch cabinet with marquetry panel. Some of the woods I used are manzanita, walnut burl, rosewood, and anigre.
I saw this chair in the Stickley catalog and just had to give it a try. I worked from the catalog photo and measurements taken from a traditional Morris Chair. Chair is made of Walnut and Cherry with...
Black walnut trim on oak box. All from rough lumber. Finger joints add visual interest. Cedar lined. Torsion hinges.
The lamp is made of beech wood, walnut and carved coconut. The carvings create light drawings on the wall - one of the nicest light effects I've managed to achieve so far :) . In this respect, good...
I live in Belgium - email : email@example.com
Another Maloof inspired rocker for my son , walnut.
LAINE FLOATING LIVE EDGE HEADBOARD
Dimensions: 65"L x 22"H x 1"W
Live-Edge Black Walnut Slab + Zebrawood Butterlies
Hand-Rubbed Oil + Wax Finish
Mounted Using Four Adjustable Stainless Steel...
MARRE LIVE EDGE COFFEE TABLE
Materials: Claro Walnut, Black Walnut
Dimensions: 74"L x 26"W x 15"H
Finish: Natural hand-rubbed oil + wax -- buffed and polished to a satin glossThis...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
My friend wanted me to build him a live edge coffee table with spalted maple. My worry was that the live edge would be too brittle and it would break when he put his feet up. I also didn't want to...
I designed this for my daughter, Erin. It is a jewelers tool box for today's hobbyist jewler. The chest stands 50 inches tall with a 24 inch by 24 in base. There are two sizes of drawers with up to...
3-doored sideboard of solid black Walnut.Drawbore pinned tenon and mortise assembly. Open slot mortise door frames.Handles of black Walnut and African Blackwood.Tung oil, Carnauba and Beeswax...
Bench with a white oak top, red oak and walnut legs, and red oak stretchers. Sanded to 320 grit with 3 coats of polyurethane. Made by Walter and Geoff.
I took William Ng's Blacker House chair class early last year. Since than, I've built a set of four in Walnut and two in Mahogany. All of the major joinery, except for the arms to legs, is cut using...
This is a lock box as requested by my grandson, to "keep his sister out of his stuff". Well the design took off and this is the result. I an a retired design engineer so I just could not stop. I put...
Hi Folks, I built this Laptop Table mainly to make it more cofortable to use a laptop in bed, as I'm sure many of you may well do. I also felt that while using it on the bed cover, the actual air...
Woodworker: Thomas Starbuck Stockton
Thomas Starbuck Stockton crafted this Greene-and-Greene-inspired buffet from a large slab of claro walnut that a friend gave him. The buffet's exterior came from...
Woodworker: William Laberge
This writing desk was inspired by one built by the Greene brothers for the Robert R. Blacker House in Pasadena, California. It is made of cherry, with walnut and ebony...
Woodworker: Darrell Peart
This piece is a "near reproduction" of the Thorsen Sideboard made by the Hall brothers and designed by Greene and Greene in 1909. The bolection inlay, proud of the surface...
Save up to 51% on Fine Woodworking
Become a Better Woodworker