July 25, 2016
built on commission, this highly carved walnut rocking chair took 200 hours to build.
July 20, 2016
A figured walnut and chinquapin coffee table with glass. This table features a through drawer with handcut dovetails. The drawer body and lower shelf are book matched walnut strengthened with...
July 3, 2016
The Vine Table was inspired by the clematis growing in our yard and other tables with overlapped legs. The Walnut vine shaped legs seem to swirl around the table and…
July 2, 2016
Curved front cherry nightstands patterned after Hammer's 2003 FWW article. I changed the height and depth to 32 and 19 ", and employed a single 4" high drawer. Drawer parts…
June 20, 2016
The Nara desk is made from figured walnut and cherry with maple drawers. Breadboard ends on the table top are draw bored and keep the piece stable. Through tenons add…
June 15, 2016
I started this Walnut Bar Stool as a set of three prototype three legged chairs and stools. Each with a slightly different look. I had a general idea of the…
June 14, 2016
This Walnut side table is inspired by nature with the base miming tree roots sprouting from the ground. The entire table flows from one part to the next with everything…
June 5, 2016
Two tone decorative box made from strips of walnut and poplar. No stain, just a light coat of polyurethane finish. About 8 x 11 in.
May 24, 2016
The design is simple, a glued up panel with tenons, and end styles with mortises. The walnut was selected for the sapwood to become the design.
April 26, 2016
inspiried by the original conoid studio and chair
Subscribe now and save up to 56%
© 2018 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 56%