showing 1 - 20 of 24 posts
1 2 Next >
This desk was partially inspired by the amazing plank of teak that went into making it. I wanted to showcase the amazingly straight and even grain. The drawer stack on the left has a bow to the front...
The overall design for this desk was to create a desk that could be folded up and out of the way. It is my take of a secretarie style desk. The desk surface occupied in the tall fall flat keeps the...
This is a Handmade Dovetail box made from beech with marquerty on lid. It is currently on show in Farmleigh House in Pheonix Park in Dublin Ireland which is a huge achievement. I made it while in...
Writing desk for my daughter,
Materials: Cherry, quilted maple and tiger striped mahogany inlay, holly and ebony banding and cuffs.
Finish: Amber shellac, non-wax shellac sealer/ wipe on varnish
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
Air-dried Walnut, White Oak
30" H x 47.5" W x 22" D
Desk inspired by a particular plank and a general love of Walnut and desks heh.
The subtle curves made the drawer box a challenge...
A very unorthodox setup for a shop none the less apart from hand tools its kind of workable in a h&s contravening haphazard way!A place to escape and create.
My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...
This work of art was designed and hand crafted by Journey Man carpenter Kelly Reagh of Nanaimo BC. This one took a few weeks to complete with all joints using traditional wood working...
I made the desk with the idea that the shape, the materials used and the finish can create an effect of drawing your eye in. Further when you sit at it, it envelopes you to create your own distinct...
I completed this walnut desk while in my last semester at college. The inlay on top is walnut, holly and bubinga and the drawer fronts are veneered in bubinga and holly stringing. The...
A Roll Top Desk I made as a project in college. it has a diamond matched veneer top, book matched veneer sides, and a hand made tambour door. all in cherry
Table/Desk Combination from an 19th Century design, dressed up with a little inlay.
Dimensions: 31" H x 60" W x 30" D
Custom made computer desk made of cherrywood with walnut inlay on top and walnut drawer pulls.
Federal Period Ladies Writing Desk
Winner 2007 "Best in Show" Traditional Work, Providence Fine Furniture Exhibit
Inspired by the masterpieces of John and...
Got this job through a interior designer .
all material was delivered to my work shop.
I used 7 1/2 weeks to make , i did not do the spray painting.
My workshop at that time was...
Cherrywood Desk and Credenza with a small Office Table.
Any long term subscriber of Fine Woodworking will recognize this piece Lonnie Bird wrote a few years back. Made out of walnut with red oak as the secondary wood, this piece stands as my crowning...
Save up to 51% on Fine Woodworking
Become a Better Woodworker