tag: veneer

showing 1 - 16 of 16 posts matching built-in [X]

Sort By:

Mahogany Office

fat418, member | April 29th, 2012

The office was constructed of book matched mahogany veneered plywood. The applied moldings on the doors are solid mahogany. The arched curved paneled entrance way and arched desk area are made from...

view details

Bird's Eye Maple Kitchen

fat418, member | April 1st, 2012

The exterior surfaces were veneered in a heavy figured bird's eye maple(50 eyes per sq inch) veneer using mdf as a more stablized substate. The interior cabinetry was lined with black mica and...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Fireplace Mantel

LHaney, member | June 27th, 20091 comment

I wanted the fireplace mantel in my living room to be very clean and modern-looking, but to include an organic element as well. I found a walnut board with a live edge, which I used as the top...

view details

Curved Bathroom Vanity

Leopardwood, member | June 26th, 20092 comments

This bathroom vanity was built to replace the ‘builder installed‘ pedestal sink in our ½ bath. It is made from mahogany and oak burl veneer. Veneer was attached using a...

view details

Asian Inspired Stairwell Barrier

toddclippinger, member | June 26th, 2009

This stairwell barrier is made of black walnut veneered panels, solid stock, brushed steel, and 1/2" tempered glass. It is bolted clear through the floor to backer plates underneath. This is another...

view details

Media Wall

AlanBYoung, member | June 19th, 2009

The project is made from Sapele veneers and hardwood. The Project features a lower bank of cabinets each with a center shelf. These store games and toys. The slim “component cabinetrdquo...

view details

Library Wall

Craig_T, member | June 17th, 20095 comments

This 33 foot long by 9 1/2 foot high built in cabinet incorporates several bookcases, pantry storage, an electronic component area, and various other types of storage. The clients...

view details

Retracting bar and art display cabinet

Jphn_D, member | June 8th, 20091 comment

built in retracting bar and art display

view details

Custom built-in window wall

wooddood, member | June 3rd, 2009

This unit was designed to fit between 2 walls and frame a window. The center section is bowfront and is veneered with figured bubinga. The drawers below the window are lateral files. The...

view details

Bowfront built-in cbinet

wooddood, member | June 3rd, 20091 comment

This cabinet was built to fit into an existing closet space that had been gutted. There is a slight bowfront to the entire unit which required several curved forms to laminate the drawer fronts and...

view details

Mahogany Crotch Bureau

PaulJeffrey, member | March 4th, 2009

Bureau with spot for t.v. behind doors. Mahogany crotch veneers and gaboon ebony nosing with ebony inlays.

view details

Wall Unit

dmdnk, member | January 17th, 20093 comments

Maple Entertainment Cabinet wit pull-out columns. This was the first wall unit I designed and built myself and I have always been fond of it. Since the photo was taken, the owner upgraded...

view details