tag: veneer

showing 1 - 15 of 15 posts matching brass [X]

Sort By:

Smokin' Sycamore & The Doom Box

VermontWS, member | March 21st, 2012

Smokin' Sycamore is a three-string cigar box guitar homage to a traditional folk instrument. The Body is made of tiger maple with quartersawn spalted sycamore sound boards. For the neck I...

view details

Tool Box

D_Peet, member | February 15th, 20127 comments

Tool box is a box with a lot of tools in it. This is a box with all the tools organized in it. It nice to have alot of tools but a pain when you can't find them. In this box each tool has a place and...

view details

Cabinet with Celtic Styling

AlanBYoung, member | December 11th, 2011

A cabinet in white-oak and black walnut with Celtic influenced details. Celtic Knots in black walnut on the top and the door. The door also features a Celtic Crosson the panel and a hand made brass...

view details

gab furniture & woodworks shop

gabfurniture, member | December 9th, 20112 comments

this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...

view details

Bathroom Cabinet with Curved Doors

TheAustrian, member | November 18th, 20113 comments

The original idea was to make a piece with straightforward sides and curved doors as an eye catcher. I had seen these doors on a piece by Jeff O'Brien and decided to give it a try. Once the doors...

view details

Art Nouveau demilune

canoeral1, member | October 30th, 20111 comment

I designed and built this during my second semester at Red Rocks Community College. It has about 200 hours in it, there is cherry, maple, mother of pearl, veneer, and a cast bronze sun that I...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Steel Chess set with Board and Case

AlanBYoung, member | August 7th, 20112 comments

When I was in my early 20's I turned several steel chess sets on a lathe in my Dad's shop. In the spring of 2011, I buffed up the chess sets and refinished them in enamel, then made a new...

view details

Greg Stewart's unorthodox Scottish shop.

Gregs83, member | July 20th, 2011

A very unorthodox setup for a shop none the less apart from hand tools its kind of workable in a h&s contravening haphazard way!A place to escape and create.

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

The Cordless Drill, artwork

Czappa, member | September 20th, 20091 comment

This is a humorious piece and a play on words, "The Cordless Drill" as we already had drills that were cordless for hundreds of years. The title is made in the brass printers plate with holes drilled...

view details

Correspondence Box

clarkatron, member | July 29th, 20093 comments

This piece came about after re-watching one of my favorite movies, "The Life Aquatic With Steve Zissou." There is a line at some point where Steve Zissou mentions to his wife Eleanor that they need...

view details

chest on stand

jasonmcbain, member | May 17th, 20096 comments

This cabinet was made from Cherry, milled by the recipient’s deceased grandfather, with spalted, curly Maple veneered sides and doors, made from wood salvaged from a pallet. The doors...

view details

The Carpenter

Czappa, member | May 8th, 20092 comments

This is a sculpture about my father who taught me woodworking when I was just a kid. Many of the tools on this piece were his. His outfit is made of 13 ply hardwood plywood cut up to make the parkay...

view details