tag: veneer


showing 1 - 20 of 450 posts
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Three Surprises

Three Surprises

I hadn't intended on creating an Art Deco-inspired piece when I came up with the design of the liquor cabinet "Three Surprises", but it ended up that way. It is intended to house one's most precious...

view details
Ellipsoid Table

Ellipsoid Table

The Ellipsoid Table was created with the idea of taking a traditionally-designed piece and breaking it down into its basic geometry through a series of intersecting, regular geometric forms...

view details
Myrtle Corner Cabinet

Myrtle Corner Cabinet

My Myrtle Corner Cabinet is made of solid Myrtle, except for the curved doors and drawers fronts. They are laminated bendable plywood fully veneered with Myrtle Burl. I built up the laminations and...

view details
SMALL HANGING WALL CABINET

SMALL HANGING WALL CABINET

Dovetailed birch cabinet with marquetry panel. Some of the woods I used are manzanita, walnut burl, rosewood, and anigre.

view details
Gem Storage Box

Gem Storage Box

4 comments

This was one of the most enjoyable boxes that I have made so far. The butterfly and Lilies incorporated into the marquetry I have been wanting to do for a long time now. I inlayed some Mother of...

view details
Federal dining table by Duncan Phyfe

Federal dining table by Duncan Phyfe

Exact replica of historic 20-ft. dining table owned by Martin Van Buren

view details
Veneered Boxes with a Twist

Veneered Boxes with a Twist

Learn how to build beautiful boxes sporting intricate geometric veneer patterns.

view details
Ribbon Box

Ribbon Box

Built for a wedding gift in France, made of walnut, tulipwood, pink ivory and crotch walnut inlays

view details
Jewelry Box

Jewelry Box

This Jewelry Box is made of marbled Crotch Walnut solids and bookmatched box elder inlays. The secondary woods are maple, ash, 1/8ply, Wenge. It features 3 layers: 2 alyers under the lid and the...

view details
Pair of Side Tables in Brass, Cherry, and Letterwood

Pair of Side Tables in Brass, Cherry, and Letterwood

Brass inlay. Curved aprons and drawer fronts. Half-blind dovetails. Antiqued Cherry, Letterwood, Eucalyptus, and Brass. Commission for a family in D.C Finished with shellac and a bit of polyurethane...

view details
Geo-Ribbon Jewelry Box

Geo-Ribbon Jewelry Box

To make this box I started off by making the Ribbon Banding which is made out of Holly, Wenge, Walnut, & Maple Hardwoods.   The background veneer is Karelain birch burl and the Marquetry is the...

view details
Bowfront Jewelry Cabinet

Bowfront Jewelry Cabinet

4 comments

This Cherry, Birdseye Maple and Wenge cabinet features through dovetail case joinery and bow front doors and drawers. The inside drawer fronts have been recessed and the outside drawer pulls were...

view details
Treasure Box

Treasure Box

1 comment

Karelian Birch veneer, Maple and Amaranth (Purpleheart). Polished lacquer gum finish. Made with traditional techniques using no power tools.

view details
Chest of drawers.

Chest of drawers.

A seven drawer chest of my own design.  The design is based on the classic semainier chest of drawers and is a fusion featuring cabriol legs and veneered sides.  To soften the bulk of the 2 in. x...

view details
Veneer Floor Lamp

Veneer Floor Lamp

1 comment

Hi Folks, Made this from Ash veneer and super bright LEDS for the light source. Hope you like...

view details
Chess Table, Queen Style Base

Chess Table, Queen Style Base

This is a table that I made 15 years ago for a designer here locally. The table was designed to have their last name initial "W" cut into the two sides of the table top in opposing woods. I cut all...

view details
Avicii

Avicii

1 comment

This is my latest veneer artwork, Swedish dj Avicii. All cut by hand with a surgery knife. The idea was taken of a photo. The veneers I used were cerejeira crotch, maple, cherry, pearwood, rosewood...

view details
Gamble Style Game Table

Gamble Style Game Table

This Jalen's third project. He is 16 years old.   This game table was designed by Darrel Peart using the Gamble House table for inspiration. I contacted Darrel and asked if he would allow me to...

view details
Boxes

Boxes

1 comment

Since my pile of cut off lumber has slowly started to take over the shop I thought I would build a few boxes with it and practice some techniques that I have wanted to try. It is also a great way to...

view details
First Father & Son Bed Project

First Father & Son Bed Project

1 comment

This King Louis XV Rococo style bed was made by both my son Eric and myself. This is our first father and son piece of furniture made together for a customer. Eric turned the four bedposts on the...

view details
showing 1 - 20 of 450 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

361204 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

user-4177614 user-4177614
joined at 4:52 pm
sakiwi sakiwi
joined Jan 2
Corrales_Bob Corrales_Bob
joined Dec 21

gwager gwager
joined Nov 20
user-4149021 user-4149021
joined Nov 15
weltwood weltwood
joined Mar 5


Create your profile now!