tag: varnish


showing 1 - 20 of 310 posts
 1 2 3 Next >  Last
Sort By:


Subscribe to RSS feed
Six Shaker Dining Chairs

Six Shaker Dining Chairs

These chairs are based on the proportions of a Shaker No. 3 side chair. The finials are patterned after ones characteristic of the Shaker community in Harvard, Mass. The legs and spindles are...

view details
Large Shaker Trestle Table

Large Shaker Trestle Table

104" long, 38" wide, I think this is the biggest thing I've made. With leaves at each end the length becomes 124". The top is an inch thick, but because of the length I started milling with 64...

view details
New console table for a living room

New console table for a living room

This is a maple console table. I adapted the plan from a Quebec (Canada) woodworking magazine. I modified certain designs and functionalities elements. L'Atelier de l'Aubier - Saint-Lazare, Quebec...

view details
Cherry Night Table

Cherry Night Table

1 comment

Hi, Here is my first attempt at using hardwood in a furniture project. It is made of cherry, with baltic birch for the drawers. I decided to use soft closing drawer slides because of personal...

view details
Boxes

Boxes

1 comment

Since my pile of cut off lumber has slowly started to take over the shop I thought I would build a few boxes with it and practice some techniques that I have wanted to try. It is also a great way to...

view details
Hide-a-bed

Hide-a-bed

New Hide-a-bed in a playroom.

view details
Garrett Hacks Elegant Side Table

Garrett Hack's Elegant Side Table

1 comment

I made some minor tweek's to Garrett's plans and wood selection.  The legs are cherry. Aprons and top are maple. Drawer bottom is Douglas fir. Ebony "socks" give the legs a chocolate dipped...

view details
Entrance furniture

Entrance furniture

2 comments

A little cabinet to store shoes in a small entrance way.

view details
Cherry Bed Frame

Cherry Bed Frame

Cherry bed frame styled after one by Thos Moser. Finished with oil varnish mixture. My wife loves it, as do I.

view details
Greene and Greene inspired coffee table

Greene and Greene inspired coffee table

This Greene and Greene styled coffee table is made primarily of cherry with walnut and ebony accents. It is approximately 24" x 50" x 18.5"   The inlay in the middle of the top is composed of ebony...

view details
Red Oak Bar

Red Oak Bar

1 comment

Custom made trimwork, armrail custom coved on table saw, all flat trim cut to best show ray flecks for visual interest against the broad grain of the panels.Bar is 43 inches high, 90 inches long. Two...

view details
Liqour Cabinet

Liqour Cabinet

1 comment

Red Oak cabinet with 3 sliding doors. 34 inches high, 8 inches deep and 82 inches long. Frame and panel doors. Panels resawn to highlight ray flecks. Finished with Oil Varnish mix.

view details
Chocking the Chicken

Chocking the Chicken

1 comment

This is a sculpture that I just had to do. Every artist puts on the wall what he thinks is improtant, so I thought I would just put this up and ask the question, Why would Anyone Make this? Made from...

view details
Receptionist Desk: cherry with walnut highlights.

Receptionist Desk: cherry with walnut highlights.

Desk with bread board top, quirk legs, doweled runners, hand cut dove tails. Mortise  & tenon construction.  Heavy duty runners that are dowed doweled through aprons adding interesting visual...

view details
Modern Adirondack Chair

Modern Adirondack Chair

4 comments

I was never a fan of the traditional adirondak chairs but when I found this plan online I had to make them. 

view details
Wenge table

Wenge table

I've had a couple of pieces of wenge in my shop for a while and thought it was time to make something with it. The inlay is made of maple and alowood. The table is finished with varnish oil. 

view details
Oval cherry table

Oval cherry table

Oval core was bricklaid, oval was veneered with cherry. Custom banding of holly and ebony applied to oval core. Legs joined to oval apron with a sliding dovetail/ bridle joint. Top  inlaid with...

view details
adjustable lounge chair

adjustable lounge chair

my design inspired by early style 2 x 8 plank furniture  one inch by 2 1/2 dowel was used on all corners too prevent racking bolts were only used on the lower arms and foot legs   

view details
Paolini #74 Stickley Book Rack - Knock Down Version

Paolini #74 Stickley Book Rack - Knock Down Version

Paolini's new video series on his variation on the #74 promises to be a great one. I've made a couple of these from his FWW May/April 2008 article. On this one, I used stub tenons and connector...

view details
Guest apartment

Guest apartment

We recently completed the addition of a small guest apartment and now I have been working on finishing it. We built custom mahogany cabinets for the kitchen and I have been busy making the furniture...

view details
showing 1 - 20 of 310 posts
 1 2 3 Next >  Last

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

352253 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

JerryDuane JerryDuane
joined Nov 27
RameshDudani RameshDudani
joined Jul 25
Hab5 Hab5
joined Jan 20

WoodShrew WoodShrew
joined Jul 1
PeterHenryPeter PeterHenry...
joined Jul 8
Aziz_Subach Aziz_Subach
joined Jul 5


Create your profile now!