showing 1 - 20 of 47 posts
1 2 3 Next >
Computer Table. Spalted oak and walnut. Angled mortise and tenons.
Based on FWW article by Steve Latta.
I highly suggest anyone over age 40 build one. Very back & eye friendly.
This thing has a ton of uses, I use it every time I'm in the shop. Light planing...
My first chair design, a cafe chair with joinery inspired by Carlo Mollino. Ebonized red oak and jatoba repurposed from luxury flooring project waste. This is version 1.0 but I will be making slight...
This chair I made just for me. I've combined the Prairie Settle ,by Kevin Rodel. Issue 199.
With the Morris Chair by Gregery Paulini. Issue 205. I kept the back the same, only longer. The seat frame...
Sculptural 4 Drawer Cabinet on Cantilevered Frame
Functional and Sculptural…
…The frames are my refined interpretation of a barn structure
…Showing the beauty and strength of wood in dynamic...
Oak Icebox was built from scratch using mortis & tenons and tougn & grooves.
Made from quarter sawn red oak. The frame is all mortise and tenon joinery. The shelves tie this all together by rabbets to the back panel and 1/2 sliding dovetails to the side frames. Oak grain...
Windor arm chair, carved volutes on end of crest rail and hand holds, milk paint finish followed by oil topcoat, Legs and stretchers are maple, spindles and bent parts are red oak, seat is pine.
Traditional trestle table construction with breadboard top. The endcaps have 5 tenons inside - the center tenon is pinned/glued/fixed; the other 4 are pinned thru slotted holes and not glued to allow...
Oak Trestle table 8' 6" long by 3'6' wide. Bread board ends. Bent lamination was used to make the arched trestle. Gives it a nice gothic look.
These are the first of 12 chairs that I am making for my two son's and their families (6 chairs each). The first set is made from Red Oak, the second set will be made from White oak.
The chairs were...
Sofa table to match the coffee and end tables. Simple design yet very strong. Finished with linseed oil.
this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...
After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...
Fun project to practice skills. No glue or metal (other than brads to mount face trim). Through tenons w/ wedges hold together. Can disassemble simply by pulling out wedges. Made from oak...
First piece in the process of replacing living room furniture w/ my own work. Next...end tables to match style. Note through tenons w/ wedges.
Bit by the woodworking bug last year after building a pergola over our patio. Tried furniture and loved it. Many more project photos to come.
Making this project, I thought "as simple as possible".
Save up to 51% on Fine Woodworking
Become a Better Woodworker