tag: tenons

showing 1 - 20 of 83 posts matching modern [X]
1 2 3 Next > Last

Sort By:

Bindemiddel Filing Cabinet

julienhardydesign, member | May 20th, 2013

Filing cabinet of curly Birch, Black Walnut and laminated Birch.Dovetailed case, wedged through-tenon and mortise, and open slot mortise base.French lacquer and Tung oil finish. Made with...

view details

Double Mahogany entry doors with veneer/foam core. Panel glued with polyurethane adhesive and floating tenons glued with Titebond III. First attempt at making curved moldings and fitting curved mitre...

view details

Walnut Coffee Table

Nathan_C, member | May 3rd, 20132 comments

This table was designed and built as part of my second semester at the Sheridan College (Oakville, ON, Canada) furniture design program. We were tasked to create a table with a drawer under 6 sq ft...

view details

Reed Bench

woodtoes, member | April 15th, 20134 comments

Built entirely from hard maple and walnut. Joinery is the key to overall aesthetic as well as the strength of bench. The marraige of contemporary design and traditional woodworking techniques is...

view details

White oak vessel

woodtoes, member | March 25th, 20134 comments

Made from a chunk of bfall-off from a dining table, this oak vessel's surfaces have been finished off using chisels. I am not much of a carver but do enjoy it when I get a chance.

view details

Blue Chair

woodtoes, member | February 27th, 2013

This chair started life as a mock up for a different design that features enameled wooden slats for the seat and back. I also had a bag of of factory second fishing stringers that a friend had given...

view details

Reed Tansu

woodtoes, member | February 26th, 2013

Commissioned in 2012 by client for private residence in Maryland. Although initial inspiration came from more traditional Tansu cabinets, some would say I have used the term incorrectly, I retained...

view details

Walnut and Cerajiera Crotch Dining Room Set

jtobs, member | December 10th, 20122 comments

This is the dining room set that I made over the last year. It is made of walnut with a Cerajiera crotch veneered sunburst pattern. It took roughly 60 hours to complete. Even though there are 4...

view details

Walnut Table

TF79, member | October 14th, 20121 comment

Solid walnut table with maple bow tie. I made this table with all hand cut tenon and lots of chisel work for the mortise. I had never done tenon and mortis and my chisels were whack. In the process...

view details

Vessel Table

ErikVoc, member | June 25th, 2012

Constructed at Red Rocks Community College School of Fine Woodworking. Hand drafted, with a total of 13 pages. Tools used: Miter, joiner, planer and table were used in 4square. Router, Festool...

view details

Curly Madrone (Arbutus) Dining Table

SFWoodworks, member | June 20th, 20121 comment

This rare (to me) heavily curly figured arbutus boards came from our local wood recovery program that have been ran by our local guild - WWW.VIWG.COM - from a few years back, at least 4~5 years as I...

view details

Burl Walnut Side Table

SFWoodworks, member | June 20th, 20121 comment

Top is edged with solid walnut, framing maple/ebony string inlay and bookmatched walnut burl veneers. The back and side panels are also veneered in burl. Pull on the door is turned ebony. Finished...

view details

Jafu Chair

Dimisco, member | June 15th, 20122 comments

It is a chair made in Aniegre wood and finished with oil. No screws or metallic parts, just wedged tennons. A design created from the idea of put together a simple but interesting shape and...

view details

Girls toy chest

james3one, member | February 27th, 2012

Made for a friend. All of the 16 mortise and tenon joints were cut by hand and the chest boards were jointed with a very old plane. Corners were mitered and reinforced with maple keys...

view details

Cone leg Highboy

billbarrand, member | February 3rd, 20121 comment

This dresser is made of solid Paduke and figured Maple and maple veneer. The drawers are solid Maple with hand cut dovetails. The legs are stave construction and turned on the lathe. This also was...

view details

Moon and Stars Table

Bluecab, member | January 23rd, 2012

This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...

view details

gab furniture & woodworks shop

gabfurniture, member | December 9th, 20112 comments

this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...

view details

Pigeonhole Hall Cabinet 58 Inch

sundogenterprises, member | September 25th, 2011

The design for this piece was inspired by the cabinet-on-stand design popularized by James Krenov. Pigeonhole assemblies are usually part of larger furniture but this one has been elevated to the...

view details

Oval Tambour Deskâ�¢

sundogenterprises, member | September 25th, 20113 comments

This desk is a member of a lineage that has persevered since the late 70's. It is made with plain figure White Hard Maple and Birdseye maple. It is 40 inches wide and 28 inches deep. Closed up it...

view details