tag: tenons

showing 1 - 20 of 116 posts matching maple [X]
1 2 3 Next > Last

Sort By:

Reed Bench

woodtoes, member | April 15th, 20133 comments

Built entirely from hard maple and walnut. Joinery is the key to overall aesthetic as well as the strength of bench. The marraige of contemporary design and traditional woodworking techniques is...

view details

Essential Workbench

kbiniowa, member | December 31st, 20122 comments

This project was completed using Lon Schleining's plan from Fine Woodworking Magazine. The bench is constructed from hard maple. I finished the top with danish oil, the base is finished with an oil...

view details

New Workbench

Tym40, member | November 24th, 2012

New Bench: Top is reclaimed African Mahogany countertop. Base is from some Old Growth Dougals Fir that had been cut and stored in an attic over 40 years ago. Drawbore Mortise and Tenon constructionI...

view details

Walnut Table

TF79, member | October 14th, 20121 comment

Solid walnut table with maple bow tie. I made this table with all hand cut tenon and lots of chisel work for the mortise. I had never done tenon and mortis and my chisels were whack. In the process...

view details

Side Table

TravisL, member | September 7th, 2012

My father-in-law had made a table similar to this for my wife when she was younger, and had been using that table in his television room for remotes and such. One day my wife decided she wanted that...

view details

Quilted maple Arts and Crafts Sideboard

lovewood, member | July 22nd, 20122 comments

Arts and Crafts quilted maple sideboard. The drawers are solid tiger maple and dovetail and the back is 3/4" tiger maple shiplap.

view details

Pennsylvania Spice Box

jlecomte, member | July 14th, 20122 comments

I made this Pennsylvania spice box from plans published in FW #196 by Steve Latta. I modified the feet (I did not like the original flat bracket feet and thus made ogee bracket feet) and the...

view details

Drop leaves table

belwoodny, member | July 5th, 2012

A small living/dining room commanded a versatile table. Only 13" wide, the table can sit 8 comfortably. Center of gravity is actually lowered when very wide leaves are down. The eight feet make it...

view details

Firehouse Table

ElliotZ, member | March 12th, 20124 comments

I was asked to restore the dining table for the Great Falls, VA Volunteer Fire Dept. as part of the grand opening of the new station. The table—a 10’ x 3’ x 2 3/4” maple...

view details

Coffee Table

greenfarmer, member | February 25th, 20121 comment

After a house fire last year the coffee table I had was destroyed so I had to build myself a new one. The tiger maple used for the top reminded me of ripples in a stream and so it needed some...

view details

Tweaking a shaker table

kenstonge, member | February 7th, 20121 comment

Padauk pegs add a whimsical detail

view details

Cone leg Highboy

billbarrand, member | February 3rd, 20121 comment

This dresser is made of solid Paduke and figured Maple and maple veneer. The drawers are solid Maple with hand cut dovetails. The legs are stave construction and turned on the lathe. This also was...

view details

Moon and Stars Table

Bluecab, member | January 23rd, 2012

This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...

view details

Cross for My Wife and the Presbyterian Women

dads66, member | January 16th, 20122 comments

Cross was made for My Wife and the Presbyterian Women at our church for a meeting they are going to, it is Walnut and Maple done with mortis and tenon to hold items together. With a...

view details

entertainment center

alextr, member | December 26th, 20112 comments

entertainment center made of hard maple.

view details

gab furniture & woodworks shop

gabfurniture, member | December 9th, 20112 comments

this is my dream shop it is 24'x45' it is a project of mine that hopefully will soon come true! i've placed the machinery in order that will work for me. i design and build to others specs, i also...

view details

Birds eye Maple side table

EandS, member | December 3rd, 20111 comment

This elegant side table was designed for a customer in Portsmouth NH. It has a hand dovetailed drawer and Ebony beading around the face.

view details

Sapple and Cherry table

EandS, member | December 3rd, 2011

This table was made for a art show my wife and I are in tomorrow and if it does not sell it will sit in our in home showroom. The top is solid Sapple and the body is Cherry. It has very elegant...

view details

I wish!

Dthirsh, member | October 19th, 2011

Open floor plan with plenty of windows for natural light and open feel. Bathroom and drafting/sharpening/tool maintenance room. 16' garage door for easy access to shop, and easily accesable wood...

view details

Oval Tambour Deskâ�¢

sundogenterprises, member | September 25th, 20113 comments

This desk is a member of a lineage that has persevered since the late 70's. It is made with plain figure White Hard Maple and Birdseye maple. It is 40 inches wide and 28 inches deep. Closed up it...

view details

showing 1 - 20 of 116 posts
1 2 3 Next > Last