tag: tenons

showing 1 - 20 of 42 posts matching chair [X]
1 2 3 Next >

Sort By:

Blue Chair

woodtoes, member | February 27th, 2013

This chair started life as a mock up for a different design that features enameled wooden slats for the seat and back. I also had a bag of of factory second fishing stringers that a friend had given...

view details

Arts and Craft Dining Chairs

kbiniowa, member | December 31st, 20123 comments

These are the first of 12 chairs that I am making for my two son's and their families (6 chairs each). The first set is made from Red Oak, the second set will be made from White oak. The chairs were...

view details

Walnut and Cerajiera Crotch Dining Room Set

jtobs, member | December 10th, 20122 comments

This is the dining room set that I made over the last year. It is made of walnut with a Cerajiera crotch veneered sunburst pattern. It took roughly 60 hours to complete. Even though there are 4...

view details

Charles Rohlfs Chair

George_Coles, member | September 13th, 2012

This is my interpretation of Charles Rohlfs chair. I was inspired to make this after seeing a copy by another woodworker and then reading the story about the valuation of this chair. I secretly hope...

view details

Jafu Chair

Dimisco, member | June 15th, 20122 comments

It is a chair made in Aniegre wood and finished with oil. No screws or metallic parts, just wedged tennons. A design created from the idea of put together a simple but interesting shape and...

view details

My modification of a Fine Woodworking Windsor Rocking Chair Plan called "Plans Change"

davidcarve, member | April 26th, 20122 comments

I bought a Fine Wood Working Windsor rocking Chair Plan a few months ago online. I altered the plan to make it recognozeable but non functional for fun. It is made from White Oak, Walnut...

view details

Girls toy chest

james3one, member | February 27th, 2012

Made for a friend. All of the 16 mortise and tenon joints were cut by hand and the chest boards were jointed with a very old plane. Corners were mitered and reinforced with maple keys...

view details

Hickory Rocker

CowboyKenny, member | December 23rd, 20113 comments

This rocker is a copy of one that my Grandfather used to use when I was a little fella. His rocker had been left out in the elements for many years and was rotted beyond repair. I built mine out of...

view details

Rohlfs Inspired Desk Chair 3

woodbridge, member | October 2nd, 20111 comment

Rohlfs inspired desk chair #3. 50 ½ inches high, 15 ½ inches wide and 16 inches deep. I made this chair for my nephew who is has just moved into his first homenbsp...

view details

Greg Stewart's unorthodox Scottish shop.

Gregs83, member | July 20th, 2011

A very unorthodox setup for a shop none the less apart from hand tools its kind of workable in a h&s contravening haphazard way!A place to escape and create.

view details

Throne

YOUNGNICK, member | June 24th, 20111 comment

This Throne is brought to you by the letter "h". Its a little known fact that I am old alumni of The Sesame Street School of Design, and its courtesy of them that I designed this chair and bring it...

view details

windsor sack back chair/ Fan Back

ACCustom, member | May 28th, 2011

theys are my owen designs to see more work go to http://accustomfurniture.blogspot.com/

view details

1/12 Scale Queen Anne Chair

Elga, member | May 21st, 2011

I am a furniture maker with a difference, I make it in 1/12 scale for dollhouses. For these chairs I used the plan from the book Queen Anne Furniture, History, Design and Construction written by...

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Greene & Greene Bar Stool

Nollie, member | May 7th, 20111 comment

My first G&G Bar Stool. I used African mahogany with African blackwood for the pegs. The stain is a cherrywood gel stain with a poly-wax topcoat. Upholstery is high density foam on a plywood base.

view details

Greene & Greene side chair

Nollie, member | May 7th, 2011

This G&G side chair i made with African Mahogany. I used a cherrywood gel stain with poly-wax topcoat. The pegs is made from African blackwood

view details

Half Size

MKConstruction, member | April 26th, 2011

This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...

view details

patio chairs

barehanded505, member | April 5th, 20113 comments

Redwood patio chairs, set of 4, rustic, mortise-tenon, pocket hole joinery, 1000 grit finish I'd call myself a beginner, this is one of my first paid furniture jobs, any feedback is appreciated...

view details

Special Gift for "Mom"

RicksWoodCrafts, member | March 25th, 2011

This bistro set was made for my mother ( who loves cats ) for her new Ipe deck . It was yet another job I practiced many different types of joinery . I used spanish cedar and mahoganynbsp...

view details