showing 1 - 20 of 133 posts
arts and crafts
1 2 3 Next > Last
Poplar Entry Bench Solid wood
Top 1 1/2" thick bread board ends.
Make a wedge and use it to cut all of the angled joinery in a dining chair.
This chair I made just for me. I've combined the Prairie Settle ,by Kevin Rodel. Issue 199.
With the Morris Chair by Gregery Paulini. Issue 205. I kept the back the same, only longer. The seat frame...
These arts and crafts style lamps are made of Kohekohe, a New Zealand native timber. The joints in the lamp shade frame are reinforced with small dominos and production is assisted by the use of five...
Built this with a secret drawer that blends in perfectly when closed. Just big enough for a gun and some money. Glued Maple and Walnut together for the top and used half-blind dovetails for the...
Sculptural 4 Drawer Cabinet on Cantilevered Frame
Functional and Sculptural…
…The frames are my refined interpretation of a barn structure
…Showing the beauty and strength of wood in dynamic...
This media cabinet was commissioned by my "day job" employer to live in our Corporate Board Room. The dimensions constrained the cabinet to fit between a support column and a wall and needed to be...
When my wife retired from teaching and started her 'volunteer career', she attempted to move herself and her stuff into my office space which is already too small. I run four businesses from there...
This bed was built from Fine Woodworking plans. I took the photos before I stained and waxed the bed frame. I believe this project to be a higher skill level project. I ordered the paper plans as...
African Mahogany adds a bit of formality to this pair of Stickley icons. The striations and natural color variations of AM maintain the visual interest. Most of thetraditionaldetailssuch...
I came across an incredibly lovely board of Santos mahogany one day, with swirls of vanilla and orange in the grain, that board is what inspired the whole piece. The legs are ebonized maple with a...
I live in Belgium - email : firstname.lastname@example.org
Craftsman/A&C style end-table built for my son's nursery. The table is going next to the Stickley Rocker and the crib which I have yet to finish. This table is 99% Quartered white Oak, the other 1...
This cradle is an original design, though was inspired and adapted from a plan in Wood mag. I wanted to build a functional cradle, that also fit my home. I wanted it to follow Stickley's mission...
This Greene and Greene styled coffee table is made primarily of cherry with walnut and ebony accents. It is approximately 24" x 50" x 18.5"
The inlay in the middle of the top is composed of ebony...
I built this table a second time for our house. Built out of quarter sawn white oak I had harvested off of land that we own. Oak, I've discovered, is a bit of a challenge in some ways but well...
These doors were made to fit a pair of beveled window inserts. Instead of using pre-cut glass stop trim, I cut moldings to give a recessed picture frame appearance for the glass and wood panel...
MARRE LIVE EDGE COFFEE TABLE
Materials: Claro Walnut, Black Walnut
Dimensions: 74"L x 26"W x 15"H
Finish: Natural hand-rubbed oil + wax -- buffed and polished to a satin glossThis...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
My friend wanted me to build him a live edge coffee table with spalted maple. My worry was that the live edge would be too brittle and it would break when he put his feet up. I also didn't want to...
Save up to 51% on Fine Woodworking
Become a Better Woodworker