showing 1 - 20 of 21 posts
1 2 Next >
This small Step stool Is made out of walnut & spalted maple I hade sitting on my wood pile it is thrue tennions and finnished in shellac. to see more of my woork visit www.Andersonwoodwork.net
Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside.
Inspired from a James Krenov piece.
Made from a chunk of bfall-off from a dining table, this oak vessel's surfaces have been finished off using chisels. I am not much of a carver but do enjoy it when I get a chance.
Cross was made for My Wife and the Presbyterian Women at our church
for a meeting they are going to, it is Walnut and Maple done with mortis and
tenon to hold items together. With a...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...
This project was quite challenging. It incorporates more than 20 mortise and tenon joints. So while it was an adventure in maintaining style and grace, it also was quite technical. The...
Designed to puzzle: Bulgarian architect Petar Zaharinov's clever designs range from practical, Danish-style aesthetics to M.C. Escher-like complexity. Plus, they come packaged in their own self-contained shopping baggie. Check out these nifty tables--they might boggle your senses!
Transform an inexpensive IKEA glass lamp with this simple, elegant and easily customized hardwood shroud. Makes a great intro to mortise and tenons for kids, so enlist your "apprentice" to cut the side panels and tenons.
This is my attempt at making a box float. I used a similar curve as seen in my Chou Chair design. I used a nice figured Western maple. Notice how I carried the figure from the lid right downnbspto...
I have an old pair on BIC Formula 4 speakers that have been an eyesore since I can remember. They sound great, but are huge,bulky and covered in a hideous imitation walnut vinyl sheetnbsp...
One of pair of old-school desktop organziers. Part of a rear desk unit built in to a full floor matching home office in Brookline Ma. Cherry with padauk accents, hand-rubbed oil and wax finish...
White Oak Solids and Shop-Sawn Veneers.
WB Satin Poly over White Glaze and Dye Stains
The shelves are solids, bookmatched, with breadboard ends pegged ....and I learned that "Rule of Thumb" is not...
My better half wanted a pair of plant stands for our dining room. They had to be small, art deco in style and primarily mahogany. The tops were turned from solid mahogany, and the legs were joined to...
Scandinavian style workbench. European beech with purpleheart accents. Hand turned brass pins support the bow saw and carpenters mallet. Project for Red Rocks Fine Woodworking...
Everything made is of Shaker inspired design. I have made many Shaker pieces over
the years. Oval boxes are made of various domestic and exotic woods.
I made this chess table in 2007 with cocobolo, maple and cherry. The frame is cherry with 1/8" thick maple and cocobolo veneer. The pulls and beading are cocobolo. The table has two drawers and two...
Made from odds and ends from previous projects. No such thing as too small an off cut to be used for something. =)
Save up to 51% on Fine Woodworking
Become a Better Woodworker