tag: tenons

showing 1 - 20 of 503 posts
1 2 3 Next > Last

Sort By:

adjustable lounge chair

jjohnparr, member | June 4th, 2013

my design inspired by early style 2 x 8 plank furniture one inch by 2 1/2 dowel was used on all corners too prevent racking bolts were only used on the lower arms and foot legs

view details

Eva's Cradle

woodtoes, member | May 28th, 20133 comments

Cradle I built for my youngest daughter. I was lucky to find these beautiful wide silver maple boards to construct body of cradle. Base is cherry and pivot points are ebony.

view details

Cherry bookcase with "floating" top

corymickelson, member | May 25th, 2013

This is my first woodworking project I designed myself. Its cherry for the main carcase, pine ship lapped back, and an oak top dyed black. This was my first venture into knife hinges, which went...

view details

Barn-Wood Dining Table

williamo21, member | May 23rd, 20131 comment

This table is built out of 100% solid white oak reclaimed from an old mule barn on our farm. The barn is around 100 years old so it makes for some interesting wood, cool spalting in areas. The...

view details

Bindemiddel Filing Cabinet

julienhardydesign, member | May 20th, 2013

Filing cabinet of curly Birch, Black Walnut and laminated Birch.Dovetailed case, wedged through-tenon and mortise, and open slot mortise base.French lacquer and Tung oil finish. Made with...

view details

Æteriske Box

julienhardydesign, member | May 19th, 2013

Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside. Inspired from a James Krenov piece. Made with...

view details

The Wrighteous sideboard

julienhardydesign, member | May 19th, 2013

3-doored sideboard of solid black Walnut.Drawbore pinned tenon and mortise assembly. Open slot mortise door frames.Handles of black Walnut and African Blackwood.Tung oil, Carnauba and Beeswax...

view details

Double Mahogany entry doors with veneer/foam core. Panel glued with polyurethane adhesive and floating tenons glued with Titebond III. First attempt at making curved moldings and fitting curved mitre...

view details

Walnut Coffee Table

Nathan_C, member | May 3rd, 20132 comments

This table was designed and built as part of my second semester at the Sheridan College (Oakville, ON, Canada) furniture design program. We were tasked to create a table with a drawer under 6 sq ft...

view details

Japanese Garden Bench

sbndominic, member | April 22nd, 2013

Built for local Relay for Life Silent Auction.

view details

3D joints for saloon table

aronde, member | April 21st, 2013

I have not come across this type of 3-dimensional joint so far. It was inspired by the wooden puzzles. Stock is 1 x 1 inch wide. Very easy to make on the table saw, using a cross-cut sled. All the...

view details

Trestle Table - Breadboard Ends

rlafferty, member | April 17th, 2013

Traditional trestle table construction with breadboard top. The endcaps have 5 tenons inside - the center tenon is pinned/glued/fixed; the other 4 are pinned thru slotted holes and not glued to allow...

view details

Reed Bench

woodtoes, member | April 15th, 20134 comments

Built entirely from hard maple and walnut. Joinery is the key to overall aesthetic as well as the strength of bench. The marraige of contemporary design and traditional woodworking techniques is...

view details

White oak vessel

woodtoes, member | March 25th, 20134 comments

Made from a chunk of bfall-off from a dining table, this oak vessel's surfaces have been finished off using chisels. I am not much of a carver but do enjoy it when I get a chance.

view details

Oak Trestle Table

CowboyKenny, member | March 25th, 2013

Oak Trestle table 8' 6" long by 3'6' wide. Bread board ends. Bent lamination was used to make the arched trestle. Gives it a nice gothic look.

view details

Pint-sized arts and crafts cabinet

MPekovich, member | March 20th, 20133 comments

Here's a great little project that packs in a big Arts and Crafts punch. It's a scaled-down version of an Arts and crafts display case that I had originally built for Fine Woodworking. It incorporates the same features as the original, but requires less lumber and effort to build.

view details

Furniture

Dustymid, member | March 16th, 2013

Dutch Pie Table is an old idea for a piece of furniture to have multiple uses; a round, half round or quarter round table with the remainder sections as shelves. Use it as storage shelves , then at...

view details

Cherry Shaker Sofa Table

cop154, member | March 15th, 2013

American Cherry sofa table in the Shaker style. Front edge has a slight radius (1" over length). Construction is mortise and haunched tenons. Finish is 2 coats BLO, 4 coats of garnet shellac (1 lb...

view details

ALPHA and OMEGA Maple slab coffee table

savage69, member | March 13th, 20131 comment

This beautiful Curly Maple slab was given to me, the person that previously had it didn't know what to do with it due to the cracks that formed from a too hot dry kiln, to me it was an opertunity for...

view details

Pennsylvania Tall Case clock

GrenadaBarefoot, member | March 3rd, 2013

As many of you know the idea of building a period piece is sort of the true test of your skills. I have built many Mission and Art/Craft and contemporary pieces but building this tall case clock has...

view details

showing 1 - 20 of 503 posts
1 2 3 Next > Last