tag: table


showing 1 - 20 of 59 posts matching varnish [X]
 1 2 3 Next > 
Sort By:


Subscribe to RSS feed
New console table for a living room

New console table for a living room

This is a maple console table. I adapted the plan from a Quebec (Canada) woodworking magazine. I modified certain designs and functionalities elements. L'Atelier de l'Aubier - Saint-Lazare, Quebec...

view details
Garrett Hacks Elegant Side Table

Garrett Hack's Elegant Side Table

1 comment

I made some minor tweek's to Garrett's plans and wood selection.  The legs are cherry. Aprons and top are maple. Drawer bottom is Douglas fir. Ebony "socks" give the legs a chocolate dipped...

view details
Greene and Greene inspired coffee table

Greene and Greene inspired coffee table

This Greene and Greene styled coffee table is made primarily of cherry with walnut and ebony accents. It is approximately 24" x 50" x 18.5"   The inlay in the middle of the top is composed of ebony...

view details
Wenge table

Wenge table

I've had a couple of pieces of wenge in my shop for a while and thought it was time to make something with it. The inlay is made of maple and alowood. The table is finished with varnish oil. 

view details
Oval cherry table

Oval cherry table

Oval core was bricklaid, oval was veneered with cherry. Custom banding of holly and ebony applied to oval core. Legs joined to oval apron with a sliding dovetail/ bridle joint. Top  inlaid with...

view details
ZEN SERVING TRAY AND STAND

ZEN SERVING TRAY AND STAND

A zen inspired serving tray stand made from bass wood and finished with spray laquer in red gloss and black satin .  

view details
Saber-legged Side Table

Saber-legged Side Table

1 comment

This was a set of tables built for a Psychiatrist's office.  It began with a request for a very small, low side table that would subtly reflect the Danish Modern furniture already in place. The...

view details
Drop leaves table

Drop leaves table

A small living/dining room commanded a versatile table. Only 13" wide, the table can sit 8 comfortably. Center of gravity is actually lowered when very wide leaves are down. The eight feet make it...

view details
Curly Madrone (Arbutus) Dining Table

Curly Madrone (Arbutus) Dining Table

1 comment

This rare (to me) heavily curly figured arbutus boards came from our local wood recovery program that have been ran by our local guild - WWW.VIWG.COM - from a few years back, at least 4~5 years as I...

view details
Moon and Stars Table

Moon and Stars Table

This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...

view details
Bathroom Vanity

Bathroom Vanity

5 comments

This is a variation of the arts and crafts coffee table from a fww article by Kevin Rodel. I built it from some old 2x4's i picked up free from craigslist. they are from a 100 year old grocery store...

view details
Fantasy Shop

Fantasy Shop

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc.  I have to raise the heights of some of the equipment to...

view details
My Dream Shop

My Dream Shop

My shop currently consists of a home brew router table, rolling disk/belt sander cart, and a power miter saw (waiting for its own rolling cart).  Everything else are hand-held power tools...

view details
Daves Workshop

Dave's Workshop

1 comment

After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...

view details
Rosewood & Maple Burl End Table

Rosewood & Maple Burl End Table

  This was an exercise in design. The shape of the legs and how they are oriented in the base are just a little unconventional. maple burl was not big enough to radius to match to the leading...

view details
Waterfall Bubinga Sofa-back Table

Waterfall Bubinga Sofa-back Table

This table features gorgeous waterfall bubinga veneers, finely hand-cut half-blind dovetailed 3 cute drawers with bird's eye maple sides for contrast. This time, I did not go for the contrasting...

view details
Robbies Woodshop

Robbie's Woodshop

I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.

view details
Small Table from firewood.

Small Table from firewood.

1 comment

One day I was picking up some pieces of firewood from my pile and thought I could use this to make a table leg. So as I collected the wood for the fire I would collect pieces that looked good and put...

view details
Marble Table

Marble Table

2 comments

This started as a simple commission. To construct a side table for a large bathroom. The client had already ordered the piece of Italian marble. My task was to make it all work. I started by making a...

view details
Design walnut table

Design walnut table

For my second woodworking project I was inspired by a Design furniture store in town. I built this walnut table using 6/4" boards. To maintain a slick look the table does not have a skirt nor...

view details
showing 1 - 20 of 59 posts
 1 2 3 Next > 

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

Join Woodworkers Like You

358701 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!

CSKRao CSKRao
joined May 27
JoeKulesza JoeKulesza
joined Jul 11
MVSteve MVSteve
joined Mar 30

KenGroves KenGroves
joined Feb 6
Rob_Appelman Rob_Appelman
joined Oct 12
FineWoodMaker FineWoodMaker
joined Jul 18


Create your profile now!