tag: table

showing 1 - 20 of 202 posts matching tenons [X]
1 2 3 Next > Last

Sort By:

Walnut Coffee Table

Nathan_C, member | May 3rd, 20132 comments

This table was designed and built as part of my second semester at the Sheridan College (Oakville, ON, Canada) furniture design program. We were tasked to create a table with a drawer under 6 sq ft...

view details

3D joints for saloon table

aronde, member | April 21st, 2013

I have not come across this type of 3-dimensional joint so far. It was inspired by the wooden puzzles. Stock is 1 x 1 inch wide. Very easy to make on the table saw, using a cross-cut sled. All the...

view details

Trestle Table - Breadboard Ends

rlafferty, member | April 17th, 2013

Traditional trestle table construction with breadboard top. The endcaps have 5 tenons inside - the center tenon is pinned/glued/fixed; the other 4 are pinned thru slotted holes and not glued to allow...

view details

Oak Trestle Table

CowboyKenny, member | March 25th, 2013

Oak Trestle table 8' 6" long by 3'6' wide. Bread board ends. Bent lamination was used to make the arched trestle. Gives it a nice gothic look.

view details

Furniture

Dustymid, member | March 16th, 2013

Dutch Pie Table is an old idea for a piece of furniture to have multiple uses; a round, half round or quarter round table with the remainder sections as shelves. Use it as storage shelves , then at...

view details

Cherry Shaker Sofa Table

cop154, member | March 15th, 2013

American Cherry sofa table in the Shaker style. Front edge has a slight radius (1" over length). Construction is mortise and haunched tenons. Finish is 2 coats BLO, 4 coats of garnet shellac (1 lb...

view details

Matsuri

Artisanflamingo, member | February 28th, 20133 comments

This is just a side table made of ash and beech, then it got tained and vintage effect white painted. Japanese furniture and style is my main inspiration. Feedback are very welcome, thanks folks !

view details

Floating Top Coffee Table - Australian Jarrah (hallway table adaption)

Adelaideguy, member | December 23rd, 20121 comment

A coffee table that was adapted from the Dec 2012 edition article "Float the Top". Constructed from Australian Jarrah (which is like trying to work reinforced concrete!), and was finished with 3...

view details

Walnut and Cerajiera Crotch Dining Room Set

jtobs, member | December 10th, 20122 comments

This is the dining room set that I made over the last year. It is made of walnut with a Cerajiera crotch veneered sunburst pattern. It took roughly 60 hours to complete. Even though there are 4...

view details

Lamp Table, Greene and Greene Style

Turbochief, member | November 9th, 20122 comments

Lamp Table, Greene & Greene Style The cherry lamp table is 22 inch L by 20 W by 22 H and has a 16 inch square frame base. It sits nicely between two arm chairs in a music listening and reading area...

view details

Walnut Table

TF79, member | October 14th, 20121 comment

Solid walnut table with maple bow tie. I made this table with all hand cut tenon and lots of chisel work for the mortise. I had never done tenon and mortis and my chisels were whack. In the process...

view details

Cherry Side Table

dogface, member | September 9th, 2012

Side table, Cherry , ebony, holly, fiddleback and Zebrawood inlay

view details

Side Table

TravisL, member | September 7th, 2012

My father-in-law had made a table similar to this for my wife when she was younger, and had been using that table in his television room for remotes and such. One day my wife decided she wanted that...

view details

Drop leaves table

belwoodny, member | July 5th, 2012

A small living/dining room commanded a versatile table. Only 13" wide, the table can sit 8 comfortably. Center of gravity is actually lowered when very wide leaves are down. The eight feet make it...

view details

Vessel Table

ErikVoc, member | June 25th, 2012

Constructed at Red Rocks Community College School of Fine Woodworking. Hand drafted, with a total of 13 pages. Tools used: Miter, joiner, planer and table were used in 4square. Router, Festool...

view details

Curly Madrone (Arbutus) Dining Table

SFWoodworks, member | June 20th, 20121 comment

This rare (to me) heavily curly figured arbutus boards came from our local wood recovery program that have been ran by our local guild - WWW.VIWG.COM - from a few years back, at least 4~5 years as I...

view details

Burl Walnut Side Table

SFWoodworks, member | June 20th, 20121 comment

Top is edged with solid walnut, framing maple/ebony string inlay and bookmatched walnut burl veneers. The back and side panels are also veneered in burl. Pull on the door is turned ebony. Finished...

view details

Arts & Crafts Inspired Dining Table

MichaeldeGroot, member | May 10th, 20123 comments

This was my first dining table project and was, by far, the biggest I have done to date. I designed and built this table myself drawing inspriation from the Arts & Crafts movement and...

view details

Mahogany Nightstand

jacko9, member | April 14th, 20121 comment

I used the Festool Domino joiner to cut the slip tenons for this copy of Tim's small cabinet. The piece is made from Honduras Mahogany with solid wood panels. I added a shelf supported by...

view details

Firehouse Table

ElliotZ, member | March 12th, 20124 comments

I was asked to restore the dining table for the Great Falls, VA Volunteer Fire Dept. as part of the grand opening of the new station. The table—a 10’ x 3’ x 2 3/4” maple...

view details

showing 1 - 20 of 202 posts
1 2 3 Next > Last