showing 1 - 20 of 49 posts
1 2 3 Next >
Two students receive the OAS Future Craftsmen Scholarship.
ROOSEVELT BOURBON SIDE TABLE
Materials: Maple Burl, Zebrawood, Steel
Dimensions: 25"L x 19"W x 24"H
Finish: Hand-rubbed oil (fully cured), shellac, and spray lacquer for added...
Oval core was bricklaid, oval was veneered with cherry. Custom banding of holly and ebony applied to oval core. Legs joined to oval apron with a sliding dovetail/ bridle joint. Top inlaid with...
This table is about 14"x24"x30", Mahogany, sumi ink, acrylic paint,shellac, oil and wax. The stem is stack lam. It is all hand carved with gouges etc. Inspired by art nouveau. The gingko leaves are...
These pieces were created mainly with hand tools. The finish includes sumi ink, oil pastel (red portions), gold leaf, and amber shellac. The inspiration comes from Japanese cultural concepts such as...
My daughter needed a table for her "studio". Instead of having a pen holder for pencils and brushes on top of the table I made three hanging underneath the table.
There are a video on YouTube showing...
A walnut coffee table with inlay, line and berry, a french polished top. Constructed with 3 hand cut dovetail drawers of figured maple and a rosewood species. Hand decorated drawer and...
Hello everyone; I've been absent from these pages for a while as I've been shepherding my students here and I feel like a proud father. I'm showing off a selection of their work all designed and...
I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...
After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...
I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.
Its a hall table that I'd been struggling to draw for a few weeks. I had the germ of an idea in my head but I couldn't get it nailed down on paper, but eventually it just fell out of me in 5 mins...
"We'd like something a little more modern," which considering that it came from an 82 year old gentelman was brave indeed. I'd made a hall mirror for Norman and his wife a couple of years earlier to...
A mahogany Pembroke table with Satinwood bellflower inlaid in crossbanded mahogany panels, satinwood paterae, ebony and maple banding. The top is inlaid with a conch shell made from satinwood in a...
This started as a simple commission. To construct a side table for a large bathroom. The client had already ordered the piece of Italian marble. My task was to make it all work.
I started by making a...
We need a dining room table, so my wife, Laura, designed one. Two four inch thick planks of white pine, seasoned for four years, were sawn in half, surfaced with hand planes, sealed with...
This table was built in the Federal style with a Texas flair. It is made using, Mesquite, Anigre, Cocobolo and Curly Maple.
Splay Legged Table designed by Garrett Hack. Made from a single cherry board (the board has enough for a second table, in progress). The board is 12" wide, so the top is a single piece. This was...
Tip-Top Sewing table 60" by 24" and the top tiped up it's 60" by 48'
The leg swing out to hold up the tip-up top
Made of maple plywood top, western maple and oak ply sides with walnut trim. Shellac...
Save up to 51% on Fine Woodworking
Become a Better Woodworker