tag: table

showing 1 - 20 of 40 posts matching frame and panel [X]
1 2 Next >

Sort By:

Mahogany Hall Table in Federal Style

Turbochief, member | June 29th, 20121 comment

Federal Style Hall Table This table is very compact but has enough capacity to handle those entry way package and mail perch duties as well as storing car keys, bus schedules, maps or whatever...

view details

End Table

wolflax44, member | June 23rd, 2012

This table is an idea of mine with much influence from other tables from the internet. All wood used is from reclaimed pallet wood, resurfaced, sanded, doweled and using lap joints put table...

view details

Black Walnut nightstand

jacko9, member | April 16th, 20121 comment

This is a Black Walnut Nightstand using the Tim Roussaeu video series design. I built this one with my Festool Domino joiner for the mortise and slip tenon joints,

view details

Mahogany Nightstand

jacko9, member | April 14th, 20121 comment

I used the Festool Domino joiner to cut the slip tenons for this copy of Tim's small cabinet. The piece is made from Honduras Mahogany with solid wood panels. I added a shelf supported by...

view details

Dovetailed hall table

accentcreate, member | February 12th, 20122 comments

A small hall table made from salvaged Sydney blue gum and silver ash. This was designed as an exercise in dovetails. Every joint is a dovetail of some kind. The breadboard ends are sliding...

view details

Fantasy Shop

Cirick, member | October 9th, 2011

I try to line my equipment up so it can be used as an out feed table if necessary, Planer being the same height as the workbenchs etc. I have to raise the heights of some of the equipment to...

view details

Dave's Workshop

dave100, member | September 8th, 20111 comment

After I retired I moved to Muskoka and built my 28 x 40 dream shop. It has hydronic radiant floor heating that keeps me warm in the winter and a 10 foot ceiling that allows for larger...

view details

Robbie's Woodshop

Robbie2527, member | June 18th, 2011

I would start off by saying that this shop would be my dream work shop because I would use every tool listed on my plan to make varios projects.

view details

papa's shop

jwm50, member | May 8th, 2011

My shop is on the main floor of a dedicated building. I have a full metal shop on the lower floor where my dust collector and compressor live. I like to have multiple...

view details

Half Size

MKConstruction, member | April 26th, 2011

This Model hapens to be half the size of my existing shop. I currently have a 24 x 40 shop/garage, but no where near the tools that I have placed in my dreamshop on here. If I ONLY had the money...

view details

Bee keepers wood shop

dkjano, member | April 26th, 2011

Hi im a Bee Keeper and a residential framer and i love working with wood. This is one design that came into my head year ago when i started rebuilding a horse barn that previous owners had into a...

view details

Special Gift for "Mom"

RicksWoodCrafts, member | March 25th, 2011

This bistro set was made for my mother ( who loves cats ) for her new Ipe deck . It was yet another job I practiced many different types of joinery . I used spanish cedar and mahoganynbsp...

view details

Williamsburg, Day 2: Mind-Blowing 3-Way Miter Joint

AsaC, member | January 13th, 201115 comments

Andrew Hunter continued his exploration of Asian tools and techniques with a mind-blowing three-way miter that he cuts surprisingly simply with a mix of power and hand tools.

view details

Table Bridge

mogador, member | December 20th, 2010

My wife asked me for a folding bridge table, without specific joints I decided on a foldaway table easy to dismantle. I have built this table in French walnut and using billiard...

view details

Tip-Top Sewing table

Sequim Tool, member | June 22nd, 20101 comment

Tip-Top Sewing table 60" by 24" and the top tiped up it's 60" by 48' The leg swing out to hold up the tip-up top Made of maple plywood top, western maple and oak ply sides with walnut trim. Shellac...

view details

Executive Conference Table

Alphie, member | June 18th, 20105 comments

This table was commissioned by the Business and Economics Department of Western Washington University in Bellingham, WA. Measuring 20 feet long by 5 feet wide by 30 inches tall, it had to be built in...

view details

End Table

Scott_Reitman, member | May 12th, 2010

This is an end table made from Mahogany. It measures 27" high, 22" deep, and 22" wide. I also make it 16" and 20" tall. The top is from a single live edge board. There are two leg styles that I...

view details

Butterfly Tavern Table

PineHillPrimitives, member | May 7th, 2010

Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.

view details

Built-in Cherry Office - Desktop Organizers

jalambert, member | April 19th, 2010

One of pair of old-school desktop organziers. Part of a rear desk unit built in to a full floor matching home office in Brookline Ma. Cherry with padauk accents, hand-rubbed oil and wax finish...

view details

Art Deco Hall Table

markcpreston, member | February 11th, 20101 comment

The design for this hall table was inspired by a 1930 Art Deco table. It is mahogany, with a carved detail at the base. The real challange was the glue up for the curved legs. The curves were cut on...

view details

showing 1 - 20 of 40 posts
1 2 Next >