showing 1 - 20 of 133 posts
arts and crafts
1 2 3 Next > Last
Greene and Greene sofa table. This is a table from the Blacker House of witch the Greene brothers designed. I worked off a photo of the piece. The wood is Sipo Mahogany, Ebony and Poplar for the...
A friend of mine owns a restaurant and needed some extra seating but was shy on room. This was the solution I came up with hanging the tables on the wall. Adds a little pizaz to the place too. Made...
This Greene and Greene styled coffee table is made primarily of cherry with walnut and ebony accents. It is approximately 24" x 50" x 18.5"
The inlay in the middle of the top is composed of ebony...
I built this table a second time for our house. Built out of quarter sawn white oak I had harvested off of land that we own. Oak, I've discovered, is a bit of a challenge in some ways but well...
ROOSEVELT CIGAR TABLE
Materials: Maple Burl, Zebrawood, Steel
Dimensions: 13"L x 11"W x 13"H
Finish: Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability and...
MARRE COFFEE TABLE
Materials: Claro Walnut, Black Walnut
Dimensions: 74"L x 26"W x 15"H
Finish: Natural hand-rubbed oil + wax -- buffed and polished to a satin gloss.
This piece features...
RYAN DISPLAY COFFEE TABLE
Materials: Black Walnut, Glass
Dimensions: 60"L x 24"W x 15"H
* SOLID HARDWOOD CONSTRUCTION -- 6/4 BLACK WALNUT
* HAND-CUT MORTISE/TENON + DOWEL WEDGE JOINERY
ROOSEVELT BOURBON TABLE
Materials: Maple Burl, Zebrawood, Steel
Dimensions: 25"L x 19"W x 24"H
Finish: Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability...
My friend wanted me to build him a live edge coffee table with spalted maple. My worry was that the live edge would be too brittle and it would break when he put his feet up. I also didn't want to...
This was one of my early designs and builds and my first chair design from scratch. There were many plublic resources from the web that were used to influence the design style. All curved shaping was...
I spent some quality time in the shop over the christmas break making Michael Pekovich's hay rake table. I used Garry Oak, a version of white oak that is native to southern Vancouver Island. I fumed...
This Modified Craftsman Coffee Table is based on the design of the coffee table shown in Fine Woodworking, April 1994, No. 105. page 84, Coffee Table Is Spare and Sturdy, by Lars MikkelsenThe...
This is just a side table made of ash and beech, then it got tained and vintage effect white painted. Japanese furniture and style is my main inspiration.
Feedback are very welcome, thanks folks !
Talented FWW editor Mike Pekovich will teach two classes in late July at Marc Adams School of Woodworking
Hi Folks, I built this Laptop Table mainly to make it more cofortable to use a laptop in bed, as I'm sure many of you may well do. I also felt that while using it on the bed cover, the actual air...
Lamp Table, Greene & Greene Style
The cherry lamp table is 22 inch L by 20 W by 22 H and has a 16 inch square frame base. It sits nicely between two arm chairs in a music listening and reading area...
Willie Sandry Designs. This is my version of an arts and crafts extension table. It extends to 103" long, which is ample room to seat 10. The material is quartersawn white oak, with walnut accents...
Willie Sandry Designs. This is an Arts and Crafts dining table with long arched rails and twin keyed tenons. The white oak material contrasts with the walnut accents. The end assemblies are...
Craftsman coffee table made from curly white oak (top, bottom shelf, and drawer fronts), with quadrilinear, quartersawn white oak legs. Aprons are quartersawn white oak. Drawers are designed to...
This classy set of matching Harmon end tables are a tastful addition to any living space. The Black Walnut and White Birch are the perfect contrast for such an original design. The only problem with...
Save up to 52% on Fine Woodworking
Become a Better Woodworker